Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test Symantec ST0-090 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test Symantec ST0-090, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.
Participer au test Symantec ST0-090 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Symantec ST0-090 symbole bien la professionnalité d'un travailleur dans cette industrie.
Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Symantec ST0-090. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Symantec ST0-090. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.
Code d'Examen: ST0-090
Nom d'Examen: Symantec (Symantec control compliance suite 10.0)
Questions et réponses: 156 Q&As
Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Symantec ST0-090 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Symantec ST0-090 réel est lancée. C'est possible à réussir 100% avec le produit de Symantec ST0-090. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
Pass4Test est un site particulier d'offrir la formation à propos de test Certification IT. C'est un bon choix pour vous aider à réussir le test Symantec ST0-090. Pass4Test offre toutes les informations et les documentations plus nouvelles qui peut vous donner plus de chances à réussir le test.
Pass4Test est un seul site de provider le guide d'étude Symantec ST0-090 de qualité. Peut-être que vous voyiez aussi les Q&A Symantec ST0-090 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
ST0-090 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-090.html
NO.1 A Data Collection job fails for a Windows machine in Control Compliance Suite 10.0 (CCS). All
components appear to have been correctly installed and configured in the console. What is an initial step
to take outside of the CCS Console (Reporting and Analytics) to troubleshoot the issue?
A. restart Symantec RMS Process Manager
B. run a bv-Control for Windows query
C. recreate the Credentials database
D. verify the Enterprise Configuration Service
Answer: B
certification Symantec ST0-090 examen ST0-090
NO.2 Which Control Compliance Suite component automates the analysis of procedural controls?
A. Standards Module
B. Entitlements Module
C. Policy Module
D. Response Assessment Module
Answer: D
Symantec ST0-090 certification ST0-090
NO.3 An administrator troubleshooting the Symantec Control Compliance system notices that both the
Application server and the Directory server failed to start. The administrator verifies that Windows started
normally on the two servers. What is the next step the administrator should take?
A. verify that the Active Directory server is running
B. ping the load balancer from the Application server
C. verify that the Information server is running
D. verify internet access from the Directory server
Answer: D
Symantec ST0-090 examen ST0-090
NO.4 Which two statements accurately describe the purpose of the Control Compliance Suite Production
database? (Select two.)
A. It stores the data that is collected from the assets.
B. It stores data specific to individual dashboards.
C. It stores the results of evaluation jobs.
D. It stores data specific to individual reports.
E. It stores evidence gathered from the extended evidence sources.
Answer: A, C
Symantec ST0-090 ST0-090 examen certification ST0-090
NO.5 Asset Import jobs from a particular site are running more slowly than Asset Import jobs from other sites.
What is the most likely cause?
A. The Application server service is untrusted for delegation.
B. One of the DPS Collectors from the site has failed.
C. The Reporting Database Synchronization job has failed.
D. Service Principal Names (SPNs) are configured incorrectly.
Answer: B
certification Symantec ST0-090 examen certification ST0-090
NO.6 What are two available formats for exporting reports from the Control Compliance Suite 10.0 Reporting
and Analytics Console? (Select two.)
A. Comma Separated Values (CSV)
B. Portable Document Format (PDF)
C. Crystal Reports (RPT)
D. Microsoft PowerPoint (PPT)
E. Microsoft Access (MDB)
Answer: B, C
certification Symantec ST0-090 ST0-090 examen ST0-090 examen ST0-090 ST0-090
NO.7 In terms of securing systems and configurations, Control Compliance Suite 10.0 performs which two
functions? (Select two.)
A. performs event correlation on security logs
B. identifies high risk systems and configurations
C. scans content of servers for confidential information
D. provides guidance for and measures effectiveness against industry standards
E. proactively blocks threats from penetrating critical systems
Answer: B, D
Symantec certification ST0-090 ST0-090
NO.8 In order to use Response Assessment Module results as policy evidence in Control Compliance Suite
(CCS), which two statements are correct? (Select two.)
A. The policy and question must be mapped to the same control statement.
B. The same CCS asset must be part of the policy and the questionnaire.
C. The questionnaire and policy evaluation must be performed simultaneously.
D. The Content Studio must be mapped to the RAM server.
E. The user must be assigned the data owner role to validate the result.
Answer: A, B
Symantec examen ST0-090 ST0-090
NO.9 Which database do the dashboards pull data from?
A. Production database
B. Reporting database
C. Evidence database
D. Master database
Answer: B
Symantec certification ST0-090 certification ST0-090 ST0-090 examen ST0-090
NO.10 What is required for the Control Compliance Suite 10.0 Application server and Directory server
components to support Kerberos authentication in an Active Directory environment?
A. username and password
B. configured PKI certificates
C. configured Service Principal Names (SPNs)
D. successful sync configuration
Answer: C
certification Symantec ST0-090 examen ST0-090
NO.11 The Response Assessment Module Web Service application pool account must be a member of which
group?
A. Administrators
B. IIS_WPG
C. RAM_Administrators
D. Distributed COM Users
Answer: B
Symantec examen certification ST0-090 ST0-090 certification ST0-090
NO.12 Which two actions can be taken on a predefined report in the Control Compliance Suite 10.0 Console?
(Select two.)
A. Move
B. Delete
C. Copy
D. Export Report Template
E. Paste
Answer: C, D
Symantec examen ST0-090 examen ST0-090
NO.13 Which function of Control Compliance Suite 10.0 is responsible for generating tiered dashboards?
A. DPS Evaluator
B. DPS Reporter
C. Application server
D. Directory server
Answer: B
Symantec ST0-090 certification ST0-090 ST0-090 ST0-090 examen ST0-090 examen
NO.14 Within an evaluation result, the status 'Unknown' is primarily defined with which check setting?
A. missing data items
B. heck ex ression
C. precondition
D. post-processing expression
Answer: A
Symantec examen ST0-090 examen ST0-090 ST0-090 ST0-090
NO.15 A single Data Processing Service (DPS) Reporter is assigned to perform database synchronization
between which two databases? (Select two.)
A. Reporting database
B. Evidence database
C. Credentials database
D. Production database
E. Master database
Answer: A, D
certification Symantec certification ST0-090 ST0-090
NO.16 A Control Compliance Suite 10.0 user schedules a Policy Acceptance report. After the Report job
finishes, the user opens the results and receives the message: 'No data available to generate this report.'
The user is sure that certain people have already accepted policies this morning. What should the user do
in order to get the data in the report?
A. run the Report Generation job again
B. run the Policy and Mandates Metrics Computation job
C. run the Report Data Purge job
D. run the Report Data Synchronization job
Answer: D
Symantec certification ST0-090 ST0-090
NO.17 What must be done before the Control Compliance Suite 10.0 can use a newly installed Data
Processing Service (DPS)?
A. synchronize settings on all registered DPS hosts
B. register the DPS with the Application server
C. set all values of the common fields with reconciliation rules
D. import primary assets
Answer: B
Symantec ST0-090 ST0-090 certification ST0-090 ST0-090
NO.18 A Standards Evaluation has completed and is ready to be viewed. What are two view options.? (Select
two.)
A. Risk-based view
B. Compliance-based view
C. Asset-based view
D. Failure-based view
E. Standard-based view
Answer: C, E
Symantec ST0-090 certification ST0-090 ST0-090 examen ST0-090
NO.19 When an administrator of Control Compliance Suite 10.0 views the results of an evaluation against a
standard, both the risk score and the compliance score are high. How can these evaluation results be
explained?
A. Multiple sections contain failures.
B. The risk score tracks critical failures.
C. Many exceptions have been approved.
D. The compliance score tracks informational items.
Answer: C
Symantec ST0-090 examen ST0-090 ST0-090 examen
NO.20 An administrator wants to ensure that issues flagged as out of compliance are addressed as efficiently
as possible. The administrator wants to trigger the remediation process. Where is the remediation option
set?
A. within the Evaluation Job Wizard
B. within the Standard specification
C. on the Asset Properties page
D. on the Reporting page
Answer: A
Symantec ST0-090 examen ST0-090 examen
Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Symantec ST0-090 juste avec la Q&A de Symantec ST0-090 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.
没有评论:
发表评论