Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Juniper JN0-541. Le guide d'étude de Pass4Test comprend les excercices de Juniper JN0-541 et la Q&A qui peut vous permetrre à réussir 100% le test Juniper JN0-541. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
Le test Certificat Juniper JN0-541 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Juniper JN0-541. Vous allez prendre toutes essences du test Juniper JN0-541 dans une courte terme.
Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Juniper JN0-541.
Code d'Examen: JN0-541
Nom d'Examen: Juniper (IDP, Associate(JNCIA-IDP))
Questions et réponses: 230 Q&As
Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Juniper JN0-541 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Juniper JN0-541 qui vous amenera le succès du test Juniper JN0-541, au lieu de traivailler avec peine et sans résultat.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Juniper JN0-541. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Juniper JN0-541. Choisir le produit de Pass4Test particulier pour le test Certification Juniper JN0-541 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
Selon les anciens test Juniper JN0-541, la Q&A offerte par Pass4Test est bien liée avec le test réel.
JN0-541 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-541.html
NO.1 Which two will change the management IP of an IDP sensor? (Choose two.)
A. Edit the existing IDP sensor object in Security Manager GUI and change the IP address.
B. Delete the IDP sensor object from Security Manager and re-add the sensor with the new IP address.
C. Useifconfig to change the management IP address.
D. Use the ACM to change the management IP address.
Answer: B,D
Juniper JN0-541 certification JN0-541 JN0-541
NO.2 Which statement is true about the attack object database update process?
A. Each sensor updates its own attack object database automatically; however they must be able to
access the Juniper site on TCP port 443.
B. The attack object database update must be manually performed by the administrator, and the
administrator must manually install it on each sensor.
C. The attack object database update can be initiated manually or automatically.
D. The attack object database update can be automatically scheduled to occur using the Security
Manager GUI.
Answer: C
Juniper JN0-541 certification JN0-541 certification JN0-541
NO.3 Which rule base would detect netcat?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: C
Juniper certification JN0-541 JN0-541 JN0-541
NO.4 Which statement about the Enterprise Security Profiler (ESP) is true?
A. The ESP must be configured and started using the IDP sensor CLI before it is used.
B. The administrator must manually initiate Security Manager to sensor polling to retrieve ESP data.
C. The ESP must be configured and started on each IDP sensor manually, using the Security Manager
GUI.
D. The ESP is started by default in IDP version 4.0 or newer.
Answer: C
certification Juniper certification JN0-541 JN0-541 JN0-541 examen certification JN0-541
NO.5 Which statement is true regarding IDP rule matching on a sensor?
A. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further.
B. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further, unless the particular rule is terminal.
C. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further.
D. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further, unless the particular rule is terminal.
Answer: B
certification Juniper certification JN0-541 JN0-541 examen JN0-541
NO.6 Which TCP port is used for communication between Security Manager and an IDP sensor?
A. 7801
B. 7800
C. 7803
D. 443
Answer: C
Juniper examen certification JN0-541 JN0-541
NO.7 What is one use of an IP action?
A. It blocks subsequent connections from specific IP addresses.
B. It modifies the IP header to redirect the attack.
C. It modifies the IP header to prevent the attack.
D. It permits or denies the traffic, based on the IP header.
Answer: A
certification Juniper JN0-541 JN0-541 examen certification JN0-541 certification JN0-541
NO.8 Which three fields in a packet must match an IDP rule before that packet is examined for an attack?
(Choose three.)
A. terminate match
B. service
C. destination address
D. source address
E. attack object
Answer: B,C,D
certification Juniper JN0-541 JN0-541 JN0-541 examen JN0-541
NO.9 Which rule base would detect the use of nmap on a network?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: B
Juniper examen certification JN0-541 certification JN0-541 JN0-541 JN0-541
NO.10 Which OSI layer(s) of a packet does the IDP sensor examine?
A. layers 2-7
B. layers 2-4
C. layer 7 only
D. layers 4-7
Answer: A
Juniper JN0-541 examen certification JN0-541 JN0-541 JN0-541
NO.11 What is "a deviation from a protocol's expected behavior or packet format"?
A. context
B. compound attack object
C. attack signature
D. protocol anomaly
Answer: D
Juniper JN0-541 JN0-541 examen JN0-541 examen JN0-541
NO.12 On a sensor, which command will indicate if log messages are being sent to Security Manager.?
A. scio vr list
B. serviceidp status
C. scio agentstats display
D. scio getsystem
Answer: C
certification Juniper JN0-541 JN0-541 examen JN0-541 examen
NO.13 Which statement is true about packet capture in the IDP sensor?
A. The Log Viewer has no indication of whether a log message has associated packet captures.
B. You can only log packets after an attack packet.
C. You can configure a particular number of packets to capture before and after an attack.
D. Packet capture records all packets flowing through the sensor.
Answer: C
certification Juniper certification JN0-541 JN0-541 examen JN0-541
NO.14 Which type of cable do you use for a console connection to an IDP sensor?
A. CAT 5 cable
B. Juniper proprietary cable
C. straight-through serial cable
D. null-modem cable
Answer: D
certification Juniper JN0-541 JN0-541 JN0-541 JN0-541 JN0-541
NO.15 Which command on the IDP sensor CLI can be used to display the sensor statistics, which policy is
installed, and mode of sensor deployment?
A. sctop "s" option
B. sensor statistics can only be displayed from Security Manager GUI
C. scio list s0 sensor stat
D. scio sensor stat
Answer: A
Juniper examen JN0-541 JN0-541 JN0-541 examen
NO.16 When connecting to a sensor using SSH, which account do you use to login?
A. admin
B. super
C. netscreen
D. root
Answer: A
Juniper JN0-541 JN0-541 certification JN0-541
NO.17 A newly re-imaged sensor is running IDP 4.0 code. You want to assign IP address
10.1.1.1 to the sensor. Which method do you use to do this?
A. Connect to the sensor's console port, login as root, and answer theEasyConfig
B. Use SSH to connect to the sensor at IP 192.168.1.1.Login as root, and run ipconfig.
C. Connect to the sensor's console port, login as admin, and answer theEasyConfig
D. Use SSH to connect to the sensor at IP 192.168.1.1.Login as admin, and run ipconfig.
Answer: A
certification Juniper JN0-541 certification JN0-541
NO.18 Exhibit:
You work as an administrator at Certkiller .com. Study the exhibit carefully. In the exhibit, which SYN
protector mode is the IDP using?
A. passive
B. handshake
C. relay
D. protective
Answer: A
certification Juniper JN0-541 examen JN0-541 examen certification JN0-541 JN0-541 examen JN0-541 examen
NO.19 After you enable alerts for new hosts that are detected by the Enterprise Security Profiler, where do you
look in Security Manager to see those alerts?
A. Security Monitor > Profiler > Application Profiler tab
B. Security Monitor > Profiler > Violation Viewer tab
C. Security Monitor > Profiler > Network Profiler tab
D. Log Viewer > Profiler Log
Answer: D
Juniper JN0-541 JN0-541 JN0-541 examen JN0-541
NO.20 You update your attack object database on Security Manager. What must you do before the new attack
objects become active on the IDP sensors?
A. You install the updated security policy on the IDP sensor.
B. No changes are required.
C. You must restart the IDP sensor.
D. You must restart the IDP processes on the IDP sensors.
Answer: A
Juniper JN0-541 JN0-541 certification JN0-541 certification JN0-541
La Q&A de Pass4Test vise au test Certificat Juniper JN0-541. L'outil de formation Juniper JN0-541 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.
没有评论:
发表评论