Le meilleur matériel de formation examen Microsoft 070-680

Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.

Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Microsoft 070-680. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

Un bon choix de l'outil à se former est le point essentiel à passer le test Microsoft 070-680, et les documentations à propos de rechercher le test Microsoft 070-680 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

La population de la Certification Microsoft 070-680 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Code d'Examen: 070-680
Nom d'Examen: Microsoft (TS:Windows 7,Configuring)
Questions et réponses: 513 Q&As

Dépenser assez de temps et d'argent pour réussir le test Microsoft 070-680 ne peut pas vous assurer à passer le test Microsoft 070-680 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.

070-680 Démo gratuit à télécharger: http://www.pass4test.fr/070-680.html

NO.1 You need to reduce the amount of space currently being used to store system restore points. What
should you do?
A. Run Disk Cleanup.
B. Run Msconfig.exe.
C. Configure disk quotas.
D. Configure Windows Backup.
Answer: A

certification Microsoft   070-680   070-680 examen   070-680

NO.2 You need to back up your Encrypting File System (EFS) certificate. You must achieve this goal in the
minimum amount of time. What should you do?
A. Run Cipher.exe /x.
B. Run Ntbackup.exe /p.
C. From Backup and Restore, click Back up now.
D. From Backup and Restore, click Create a system image.
Answer: A

Microsoft   070-680   070-680

NO.3 You are evaluating the purchase a netbook computer that has the following hardware:
*1.6-gigahertz (GHz)
*32-bit processor
*1024-MB RAM
*1 video card that uses shared memory
*4-GB solid state drive.
You need to ensure that you can install Windows 7 Enterprise on the netbook computer.
Which hardware component should you change?
A. hard disk
B. processor
C. RAM
D. video card
Answer: A

Microsoft   070-680   070-680   certification 070-680

NO.4 You have a computer that runs Windows 7. You manually create a system restore point. You need to
restore a copy of a file stored on drive C from two days ago. You must achieve this goal in the minimum
amount of time. What should you do?
A. From Recovery, select System Restore.
B. From Backup and Restore, select Restore my files.
C. From the command prompt, run Wbadmin get items.
D. From the properties of the file, select Previous Versions.
Answer: D

Microsoft   certification 070-680   070-680 examen   certification 070-680

NO.5 You have a computer that runs Windows 7. The computer has System Protection enabled. You need to
retain only the last System Protection snapshot of the computer. All other snapshots must be deleted.
What should you do?
A. Run Disk Cleanup for Programs and Features.
B. Run Disk Cleanup for System Restore and Shadow Copies.
C. From the System Protection Restore settings, select Turn off System Restore.
D. From the System Protection Restore settings, select Only restore previous versions of files.
Answer: B

Microsoft   070-680 examen   070-680

NO.6 A user reports that he is unable to start his computer. He provides the following information:
* The boot partition is encrypted by using BitLocker Drive Encryption (BitLocker).
* The user cannot locate his BitLocker recovery key.
* You need to start Windows 7 on the computer.
The solution must use the minimum amount of administrative effort. What should you do?
A. From the BIOS, disable the Trusted Platform Module (TPM).
B. Start the computer from the Windows 7 installation media and select Install now.
C. Start the computer from the Windows 7 installation media and select Repair your computer.
D. Start the computer from the Windows 7 installation media, press SHIFT+F10, and then run CHKDSK.
Answer: B

certification Microsoft   070-680 examen   070-680

NO.7 You have a computer that has the following hardware configuration:
* 1.6-gigahertz (GHz) processor (64-bit).
* 8-GB RAM.
* 500-GB hard disk.
* Graphics card that has 128-MB RAM.
You need to select an edition of Window 7 to meet the following requirements:
* Support DirectAccess
* Support Windows XP Mode
* Use all of the installed memory
* Support joining an Active Directory domain
Which edition should you choose?
A. Windows 7 Enterprise (64-bit)
B. Windows 7 Enterprise (x86)
C. Windows 7 Professional (64-bit)
D. Windows 7 Ultimate (x86)
Answer: A

Microsoft   070-680 examen   070-680   070-680   070-680 examen

NO.8 You have a computer that runs Windows 7 Professional. A USB disk is attached to the computer. You
need to ensure that you can enable BitLocker To Go on the USB disk. What should you do?
A. Enable Encrypting File System (EFS).
B. Upgrade the computer to Windows 7 Enterprise.
C. Initialize the Trusted Platform Module (TPM) hardware.
D. Obtain a client certificate from an enterprise certification authority (CA).
Answer: B

Microsoft   070-680 examen   070-680   070-680

NO.9 You have a computer that runs Windows Vista. You install Windows 7 on a new partition on the
computer. You need to ensure that the computer always starts Windows Vista by default. What should you
do?
A. Run Bcdedit.exe and specify the /default parameter.
B. Run Bcdedit.exe and specify the /bootems parameter.
C. Create a boot.ini file in the root of the Windows 7 partition.
D. Create a boot.ini file in the root of the Windows Vista partition.
Answer: A

certification Microsoft   070-680 examen   certification 070-680

NO.10 You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive
is connected to a RAID controller. During the installation, you discover that the Windows 7 installation
media does not include the files required to install the RAID controller. You need ensure that you can
install Windows 7 on the hard disk drive. What should you do?
A. Insert the Windows installation media and press F8 during the computer's power-on self test (POST).
B. Insert the Windows installation media and press F6 during the computer's power-on self test (POST).
C. Start the computer from the Windows installation media. From the Install Windows dialog box, click
Load Driver.
D. Start the computer from the Windows installation media. From the Install Windows dialog box, click
Drive options (advanced).
Answer: C

certification Microsoft   070-680   070-680 examen   070-680   070-680

NO.11 You have a computer that runs Windows 7. You have a system image of the computer. You need to
restore a single file from the system image. You must achieve this goal in the minimum amount of time.
What should you do first?
A. From Disk Management, select Attach VHD.
B. From Backup and Restore, select Restore my files.
C. Restart the computer and run System Restore.
D. Restart the computer and run System Image Recovery.
Answer: A

Microsoft examen   certification 070-680   070-680   070-680   070-680   070-680

NO.12 You have a computer that runs Windows 7. The computer has a single volume. You install 15
applications and customize the environment.
You complete the following actions:
* Create an export by using Windows Easy Transfer.
* Create a system image by using Backup and Restore.
* Install the User State Migration Tool (USMT) and run Scanstate. The disk on the computer fails.
* You replace the disk.
* You need to restore the environment to the previous state.
What should you do?
A. Install Windows 7, install USMT, and then run Loadstate.
B. Install Windows 7 and then import the Windows Easy Transfer package.
C. Start the computer from a Windows Recovery Environment (Windows RE) disk and then run
Bcdboot.exe.
D. Start the computer from a Windows Recovery Environment (Windows RE) disk and then restore the
system image.
Answer: D

Microsoft   certification 070-680   070-680 examen   070-680 examen   certification 070-680

NO.13 You perform a clean installation of Windows 7 on a computer. You need to ensure that you can run
Windows XP Mode in Windows 7. What should you do?
A. Enable hardware-assisted virtualization.
B. Create a Data Execution Prevention (DEP) exception.
C. Install Windows XP in the same partition as Windows 7.
D. Install Windows XP in a different partition than Windows 7.
Answer: A

certification Microsoft   certification 070-680   070-680

NO.14 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to
install Windows 7 on the computer by using the DVD installation media and receive the following error
message: Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need
to ensure that you can install Windows 7 on the computer by using the DVD installation media. What
should you do?
A. From the BIOS, modify the startup order.
B. From the BIOS, enable Pre-Boot Execution Environment (PXE).
C. Create an answer file named oobe.xml and place the file on the hard disk drive.
D. Create an answer file named autounattend.xml and place the file on the hard disk drive.
Answer: A

Microsoft   070-680 examen   070-680   certification 070-680

NO.15 You have a computer that runs Windows Vista Service Pack 2 (SP2). You need to upgrade the
computer to Windows 7. What should you do?
A. Start the computer from the Windows 7 installation media and select the Upgrade option.
B. Start the computer from the Windows 7 installation media and select the Custom (advanced) option.
C. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Upgrade
option.
D. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Custom
(advanced) option.
Answer: C

Microsoft   070-680 examen   070-680 examen   070-680

NO.16 You have a computer that is certified for Windows 7. You need to install Windows 7 on the computer.
The installation method must prevent you from being prompted for information during the installation.
What should you do?
A. Create an unattend.txt file on a removable drive. Start the computer from the Windows 7 installation
media.
B. Create an autounattend.xml file on a removable drive. Start the computer from the Windows 7
installation media.
C. Start the computer from the Windows 7 installation media. At the command prompt, run Setup.exe and
specify the /m parameter.
D. Start the computer from the Windows 7 installation media. At the command prompt, run Setup.exe and
specify the /tempdrive parameter.
Answer: B

certification Microsoft   070-680 examen   certification 070-680   070-680 examen   070-680

NO.17 You have a computer that runs Windows XP. The computer has one basic disk that contains a single
partition. The partition has 30 GB of free space. The hard disk has 5 GB of unallocated space. You need
to install Windows 7 in a dual-boot configuration. Windows 7 must not be installed in a virtual hard disk
(VHD). What should you do first?
A. Create a second partition.
B. Shrink the primary partition.
C. Convert the hard disk to a GPT disk.
D. Convert the hard disk to a dynamic disk.
Answer: B

Microsoft   070-680 examen   070-680

NO.18 You have a computer that runs Windows 7. You add a new hard disk drive to the computer and create a
new NTFS partition. You need to ensure that you can use the Previous Versions feature on the new drive.
What should you do?
A. From Disk Management, convert the new disk to a dynamic disk.
B. From System Properties, configure the System Protection settings.
C. From System and Security, enable BitLocker Drive Encryption (BitLocker).
D. From the properties of the new drive, create a share and modify the caching settings.
Answer: B

Microsoft   070-680 examen   certification 070-680   certification 070-680

NO.19 You have a computer that runs Windows Vista (x86). You need to perform a clean installation of
Windows 7 (64-bit). What should you do?
A. From the Windows 7 installation media, run Rollback.exe.
B. From the Windows 7 installation media, run Migsetup.exe.
C. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select
the Upgrade option.
D. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select
the Custom (advanced) option.
Answer: D

Microsoft   070-680   070-680   070-680   070-680

NO.20 You have a computer that runs Windows 7. You need to identify how much disk space is occupied by
previous versions. What should you do?
A. At a command prompt, run Diskpart.
B. At a command prompt, run Vaultcmd.
C. From System, view the System Protection settings.
D. From the properties of drive C, view the previous versions settings.
Answer: C

Microsoft   certification 070-680   070-680   070-680   070-680   070-680 examen

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification Microsoft 070-680, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

Microsoft 070-686 examen pratique questions et réponses

Le test de Certification Microsoft 070-686 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Microsoft 070-686. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Code d'Examen: 070-686
Nom d'Examen: Microsoft (Pro: Windows 7, Enterprise Desktop Administrator)
Questions et réponses: 185 Q&As

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Microsoft 070-686 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Microsoft 070-686 réel est lancée. C'est possible à réussir 100% avec le produit de Microsoft 070-686. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Peut-être vous voyez les guides d'études similaires pour le test Microsoft 070-686, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Microsoft 070-686 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

070-686 Démo gratuit à télécharger: http://www.pass4test.fr/070-686.html

NO.1 You deploy Windows 7 to the computers that are used by your companys Web developers. All
Web developer user accounts are in a single organizational unit (OU).
Internet Explorer is blocking pop-up windows for multiple internal Web applications that are hosted
on different servers.
You need to use Group Policy to ensure that Internet Explorer does not block pop-up windows for
internal Web applications.
What should you do?
A.
Enable Compatibility View in Internet Explorer.
B.
Add each server to the Intranet zone.
C.
Add each server to the Trusted Sites zone.
D.
Set the default security setting in Internet Explorer to Medium.
Answer: B

Microsoft examen   070-686   070-686

NO.2 You have a single Active Directory Domain Services (AD DS) site. All client computers run
Windows 7. Users in the marketing department use a custom application.
You create a new Group Policy object (GPO) and link it to the site. Users in the marketing
department then report that they are unable to use the custom application.
You need to ensure that all users in the marketing department are able to use the custom
application. You need to ensure that all other users continue to receive the new GPO.
What should you do?
A.
Add marketing users to a domain group. Use security filtering to grant the group the Allow-Read
permission and the Allow-Apply Group Policy permission for the GPO.
B.
Move marketing users to a dedicated organizational unit (OU). Apply the Block Inheritance
setting to the OU.
C.
Add marketing users to a domain group. Use security filtering to grant the group the Allow-Read
permission and the Deny-Apply Group Policy permission for the GPO.
D.
Move marketing users to a dedicated organizational unit (OU). Apply the Block Inheritance
setting to the domain.
Answer: C

Microsoft examen   070-686   070-686

NO.3 Your companys network includes client computers that run Windows 7. You design a wireless network
to use Extensible Authentication ProtocolCTransport Level Security
(EAP-TLS). The Network Policy Server has a certificate installed.
Client computers are unable to connect to the wireless access points.
You need to enable client computers to connect to the wireless network.
What should you do?
A.
Install a certificate in the Trusted Root Certification Authorities certificate store.
B.
Configure client computers to use Protected Extensible Authentication ProtocolCTransport
Layer Security (PEAP-TLS).
C.
Configure client computers to use Protected Extensible Authentication Protocol-Microsoft
Challenge Handshake Authentication Protocol version 2 (PEAP-MS-CHAP v2).
D.
Install a certificate in the Third-Party Root Certification Authorities certificate store.
Answer: A

Microsoft   certification 070-686   070-686   070-686   070-686

NO.4 All client computers in an organization run Windows 7 and are joined to an Active Directory
Domain Services (AD DS) domain. All user objects are stored in an Organizational Unit (OU)
named Contoso Users. All computer objects are stored in an OU named Contoso Computers.
You need to add a proxy server to the Microsoft Internet Explorer 9 configuration on all client
computers by using the least administrative effort.
Which three actions should you perform? (To answer, move the appropriate action from the list of
actions to the answer area and arrange them in the correct order.)
Answer:

NO.5 You are designing an application deployment strategy.
Application deployments must meet the following requirements:
They must be able to use Setup.exe.
They must not require Active Directory.
The safer , easier way to help you pass any IT exams.
9 / 11
They must not require a constant network connection.
The application installation schedule must be easy to set up and implement.
You need to recommend a method that meets the requirements.
What should you recommend? (To answer, drag the appropriate deployment method from the list
of deployment methods to the correct location or locations in the work area.)
Answer:

NO.6 Your companys network has client computers that run Windows 7. Multiple users share the
computers in the shipping department. These computers reside in the Shipping Computers
organizational unit (OU).
The network design is shown in the following diagram.
You are planning to deploy an application. The application is packaged as a Microsoft Windows
Installer package (MSI).
You need to deploy the application only to computers in the shipping department.
Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A.
Link the software installation policy to the Workstations OU.
B.
Link the software installation policy to the Shipping Computers OU.
C.
Create a new Group Policy object (GPO) and add a software installation policy under the User
Configuration container.
D.
Create a new Group Policy object (GPO) and add a software installation policy under the
Computer Configuration container.
Answer: BD

certification Microsoft   070-686   070-686 examen

NO.7 Your company s network has client computers that run Windows 7. Multiple users share the computers
in the shipping department. These computers reside in the Shipping Computers
organizational unit (OU).
The company wants to deploy a new application. The application is not packaged.
You have the following requirements:
Deploy the application to all computers in the shipping department.
Perform the deployment from a central location.
You need to plan the software deployment process to meet the requirements.
Which two actions should you include in the process? (Each correct answer presents part of the
solution. Choose two.)
A.
Using Microsoft System Center Configuration Manager, create a collection that contains the
shipping department computers, and assign the package to the collection.
B.
Create a package by using Microsoft System Center Configuration Manager.
C.
Create a Group Policy object (GPO) and add a software installation policy under the Computer
Configuration container.
D.
In the Group Policy Management Console, link the software installation policy to the Shipping
Computers OU.
E.
Using Microsoft System Center Configuration Manager, create a collection that contains the
shipping department users, and assign the package to the collection.
Answer: AB

Microsoft examen   certification 070-686   070-686   070-686 examen
Section: A

NO.8 Your network has client computers that run Windows XP. All users access a custom line-ofbusiness
application. The line-of-business application is not compatible with Windows 7.
You are planning to deploy Windows 7.
You have the following requirements:
The application must run on all client computers.
The application executable must reside on each client computer.
You need to manage application compatibility to meet the requirements.
What should you do?
A.
Install the application on a Remote Desktop Services server.
B.
Install a shim for the application on each client computer.
C.
Virtualize the application by using Microsoft Application Virtualization (App-V).
D.
Install the Windows Compatibility Evaluator on each client computer.
Answer: B

Microsoft   070-686   070-686 examen

NO.9 Your company has a single Active Directory Domain Services (AD DS) domain with Windows
Server 2008 R2 member servers and 1,000 Windows 7 client computers.
You are designing the deployment of a custom application.
You have the following requirements:
- The application must be available to only users who need it.- Minimize network traffic during
deployment.
- You need to design a deployment strategy that meets the requirements.
Which deployment method should you use?
A.
Microsoft Application Virtualization (App-V)
B.
Microsoft System Center Configuration Manager 2007
C.
RemoteApp and Desktop Connections
D.
software installation in Group Policy
Answer: C

Microsoft   070-686   certification 070-686   070-686

NO.10 Your network has client computers that run Windows 7 Enterprise. You plan to deploy new
administrative template policy settings by using custom ADMX files. You create the custom ADMX
files, and you save them on a network share. You start Group Policy Object Editor (GPO Editor).
The custom ADMX files are not available in the Group Policy editing session. You need to ensure
that the ADMX files are available to the GPO Editor. What should you do?
A.
Copy the ADMX files to the % systemroot% \ inf folder on each Windows 7 computer, and then
restart the GPO Editor.
B.
Set the network share permissions to grant all Windows 7 users Read access for the share.
C.
Copy the ADMX files to the %systemroot% \ system32 folder on each Windows 7 computer,
and then restart the GPO Editor.
D.
Copy the ADMX files to the central store, and then restart the GPO Editor.
Answer: D

Microsoft examen   certification 070-686   certification 070-686   070-686 examen   070-686 examen

NO.11 Your company has 1,000 Windows XP computers. You plan to migrate these computers to
Windows 7.
You need to detect compatibility issues that can occur during the installation and configuration
process for a specific application.
Which tool should you use?
A.
Windows Compatibility Evaluator
B.
Setup Analysis Tool
C.
Inventory Collector
D.
Update Compatibility Evaluator
Answer: B

Microsoft   certification 070-686   070-686   070-686 examen   070-686 examen

NO.12 You are planning to upgrade Internet Explorer.
You have the following requirements:
- create a report that identifies which computers are succesfully upgraded
- do not install additional software on the client computers
You need to design a deployment method that meets the requirements.
What should you do?
A.
Use Windows Server Update Services (WSUS)
B.
Use Internet Explorer Administration Kit (IEAK) and Group Policy
C.
Use Microsoft System Center Configuration Manager
D.
Use Microsoft System Center Essentials.
Answer: A

Microsoft   070-686   070-686

NO.13 Your company has two Active Directory Domain Services (AD DS) domains, Domain1 and
Domain2. A two-way trust relationship exists between the domains.
Users in both domains can log on to client computers in only their own domains. System logs on
the domain controllers display the error message Clock skew too great when users in Domain1
attempt to log on to client computers in Domain2.
You need to ensure that users can log on to client computers in both domains.
What should you do?
A.
Decrease the Maximum tolerance for computer clock synchronization setting in the default
Domain Group Policy object ( GPO ).
B.
Configure the primary domain controller (PDC) emulatorin each domain to synchronize its clock
with the same external time source.
C.
Run a startup script that includes Net Time /setsntp on all client computers.
D.
Run a startup script that includes Net Time /querysntp on all client computers.
Answer: B

certification Microsoft   certification 070-686   070-686   070-686

NO.14 Your network has client computers that run Windows Vista.
You are planning to deploy Windows 7.
You need to detect and analyze the compatibility of an application that requires elevated
privileges.
What should you do?
A.
Use the Standard User Analyzer (SUA) Wizard.
B.
Run a virtual version of the Setup Analysis Tool (SAT).
C.
Use the Standard User Analyzer (SUA) tool.
D.
Run a stand-alone version of the Setup Analysis Tool (SAT).
Answer: C

certification Microsoft   certification 070-686   070-686   070-686

NO.15 Your company has 1,000 client computers that run Windows XP Professional x64.
You are planning to deploy Windows 7 Enterprise x64.
The company uses an application that is incompatible with Windows 7 Enterprise x64.
You have the following requirements:
Provide all users with access to the application.
Deploy and manage the application by using a centralized solution.
You need to design a solution that meets the requirements.
What should you do?
A.
Install the application on all client computers by using Group Policy, and then use the
Compatibility tab.
B.
Install the Microsoft Application Virtualization (App-V) client on each client computer, and run
the application in offline mode.
C.
Install the Microsoft Enterprise Desktop Virtualization (MED-V) package on each client
computer.
D.
Install the Microsoft Application Virtualization (App-V) client on each client computer, and
stream the application by using App-V.
Answer: C

certification Microsoft   070-686   070-686   certification 070-686   070-686 examen

NO.16 Your company has an Active Directory Domain Services (AD DS) forest with a single domain
named contoso.com. The design of the organizational units (OUs) and Group Policy objects
(GPOs) is shown in the following diagram.
Multiple computer configuration settings and user configuration settings are defined in the Kiosk
Computers GPO.
A security audit indicates that user configuration settings that are defined in the Kiosk Computers
GPO are not applied when users log on to client computers that are in the Kiosk Computers OU.
You need to ensure that the user configuration settings are correctly applied.
What should you do?
A.
Enable loopback processing in Merge mode on the Default Domain Policy GPO.
B.
Disable the user configuration settings on the Default Domain Policy GPO.
C.
Enable loopback processing in Replace mode on the Kiosk Computers GPO.
D.
Disable the user configuration settings on the New York Users GPO.
Answer: C

Microsoft   070-686 examen   070-686

NO.17 You use Group Policy to standardize Internet Explorer settings on Windows 7 client computers.
Users occasionally change the Internet Explorer settings on individual client computers.
The company wants to maintain a standard Internet Explorer configuration on all client
computers.
You need to ensure that the standard Internet Explorer configuration is in place each time users
log on to client computers.
What should you do?
A.
Use Group Policy to disable the Advanced tab of the Internet Explorer Properties dialog box.
B.
Use the Group Policy Update utility to refresh Group Policy.
C.
Enable Internet Explorer Maintenance Policy Processing in Group Policy.
D.
Enable User Group Policy loopback processing mode.
Answer: C

Microsoft examen   certification 070-686   070-686 examen   070-686

NO.18 Your network consists of an Active Directory Domain Services (AD DS) forest with 1,000 client
computers that run Windows XP. Nine hundred of the computers are on the local area network.
One hundred computers are portable computers that connect to the main office only once every
few months.
You are planning to deploy Windows 7.
You need to generate a report of the software that is installed on all client computers. You need
this information as soon as possible.
What should you use?
A.
Microsoft System Center Data Protection Manager
B.
Microsoft Desktop Optimization Pack
C.
Microsoft System Center Essentials
D.
Microsoft System Center Operations Manager
Answer: B

Microsoft   070-686 examen   070-686 examen

NO.19 Your company infrastructure includes a Windows Server 2008 R2 file server and 1,000 Windows 7
Enterprise client computers.
The company wants to require a secure connection between client computers and the file server.
You need to create and deploy a Group Policy object (GPO) that includes a rule for Windows
Firewall with Advanced Security.
What should you do?
A.
Create an Isolation rule and specify Request authentication for inbound and outbound
connections.
B.
Create a Tunnel rule and specify Gateway-to-client as the tunnel type.
C.
Create a Server-to-server rule and specify the endpoints as Any IP address and the file server
IP address.
D.
Create an Authentication exemption rule and add the file server IP address to the Exempt
Computers list.
Answer: C

Microsoft examen   070-686   070-686 examen

NO.20 Your companys network has client computers that run Windows 7.
When a user attempts to log on to the domain from a computer named Client1, she receives the
following message: The system cannot log you on to this domain because the system's computer
account in its primary domain is missing or the password on that account is incorrect.
You need to ensure that the user can log on to the domain from Client1.
What should you do?
A.
Disjoin and rejoin Client1 to the domain.
B.
Reset the account password for Client1 through Active Directory Users and Computers.
C.
Add the computer account for Client1 to the Domain Computers Active Directory group.
D.
Reset the account password for the user through Active Directory Users and Computers.
Answer: A

Microsoft   070-686   070-686 examen

Si vous faites toujours la lutte contre le test Microsoft 070-686, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Microsoft 070-686. Si vous avez déjà décidé à s'améliorer via Microsoft 070-686, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Dernières Microsoft 083-640 examen pratique questions et réponses

Après une longue attente, les documentations de test Microsoft 083-640 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Microsoft 083-640 à la première fois.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Microsoft 083-640.

Si vous voulez ne se soucier plus à passer le test Microsoft 083-640, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Microsoft 083-640. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Microsoft 083-640 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

Code d'Examen: 083-640
Nom d'Examen: Microsoft (TS:WindowsServer2008ActiveDirectory,)
Questions et réponses: 165 Q&As

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Microsoft 083-640. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Microsoft 083-640. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

083-640 Démo gratuit à télécharger: http://www.pass4test.fr/083-640.html

NO.1 Your network consists of a single Active Directory domain. The domain contains 10 domain controllers.
The domain controllers run Windows Server 2008 and are configured as DNS servers.
You plan to create a new Active Directory-integrated zone.
You need to ensure that the new zone is only replicated to four of your domain controllers. What should
you do first?
A. Create a new delegation in the ForestDnsZones application directory partition.
B. Create a new delegation in the DomainDnsZones application directory partition.
C. From the command prompt, run dnscmd and specify the /enlistdirectorypartition parameter.
D. From the command prompt, run dnscmd and specify the /createdirectorypartition parameter. Answer: D

Microsoft   083-640   083-640   083-640 examen   083-640

NO.2 You have a domain controller named DC1 that runs Windows Server 2008. DC1 is configured as a
DNS Server for contoso.com.
You install the DNS Server role on a member server named Server1 and then you create a standard
secondary zone for contoso.com. You configure DC1 as the master server for the zone.
You need to ensure that Server1 receives zone updates from DC1. What should you do?
A. On Server1, add a conditional forwarder.
B. On DC1, modify the permissions of contoso.com zone.
C. On DC1, modify the zone transfer settings for the contoso.com zone.
D. Add the Server1 computer account to the DNSUpdateProxy group.
Answer: C

certification Microsoft   083-640 examen   083-640

NO.3 Your company, Contoso, Ltd., has a main office and a branch office. The offices are connected by a
WAN link. Contoso has an Active Directory forest that contains a single domain named ad.contoso.com.
The ad.contoso.com domain contains one domain controller named DC1 that is located in the main office.
DC1 is configured as a DNS server for the ad.contoso.com DNS zone. This zone is configured as a
standard primary zone.
You install a new domain controller named DC2 in the branch office. You install DNS on DC2.
You need to ensure that the DNS service can update records and resolve DNS queries in the event that a
WAN link fails.
What should you do?
A. Create a new stub zone named ad.contoso.com on DC2.
B. Configure the DNS server on DC2 to forward requests to DC1.
C. Create a new standard secondary zone named ad.contoso.com on DC2.
D. Convert the ad.contoso.com zone on DC1 to an Active Directory-integrated zone.
Answer: D

Microsoft   083-640   083-640

NO.4 Your network consists of an Active Directory forest that contains one domain. All domain controllers run
Windows Server 2008 and are configured as DNS servers. You have an Active Directory-integrated zone.
You have two Active Directory sites. Each site contains five domain controllers.
You add a new NS record to the zone.
You need to ensure that all domain controllers immediately receive the new NS record. What should you
do?
A. From the DNS Manager console, reload the zone.
B. From the Services snap-in, restart the DNS Server service. C. From the command prompt, run
repadmin /syncall.
D. From the DNS Manager console, increase the version number of the SOA record.
Answer: C

Microsoft examen   083-640   083-640 examen   083-640   083-640   083-640 examen

NO.5 Your network consists of an Active Directory forest that contains one domain named contoso.com. All
domain controllers run Windows Server 2008 and are configured as DNS servers. You have two Active
Directory-integrated zones: contoso.com and nwtraders.com.
You need to ensure a user is able to modify records in the contoso.com zone. You must prevent the user
from modifying the SOA record in the nwtraders.com zone.
What should you do?
A. From the DNS Manager console, modify the permissions of the contoso.com zone.
B. From the DNS Manager console, modify the permissions of the nwtraders.com zone.
C. From the Active Directory Users and Computers console, run the Delegation of Control Wizard.
D. From the Active Directory Users and Computers console, modify the permissions of the Domain
Controllers organizational unit (OU).
Answer: A

Microsoft   083-640   083-640   certification 083-640

NO.6 Your company has a main office and a branch office. The company has a single-domain Active
Directory forest.
The main office has two domain controllers named DC1 and DC2 that run Windows Server 2008. The
branch office has a Windows Server 2008 read-only domain controller (RODC) named DC3.
All domain controllers hold the DNS Server role and are configured as Active Directory-integrated zones.
The DNS zones only allow secure updates.
You need to enable dynamic DNS updates on DC3. What should you do?
A. Run the Ntdsutil.exe > DS Behavior commands on DC3.
B. Run the Dnscmd.exe /ZoneResetType command on DC3.
C. Reinstall Active Directory Domain Services on DC3 as a writable domain controller.
D. Create a custom application directory partition on DC1. Configure the
partition to store Active
Directory-integrated zones.
Answer: C

certification Microsoft   certification 083-640   certification 083-640   083-640   083-640

NO.7 Your network consists of a single Active Directory domain. All domain controllers run Windows Server
2008 and are configured as DNS servers. A domain controller named DC1 has a standard primary zone
for contoso.com. A domain controller named DC2 has a standard secondary zone for contoso.com.
You need to ensure that the replication of the contoso.com zone is encrypted. You must not lose any zone
data.
What should you do?
A. On both servers, modify the interface that the DNS server listens on.
B. Convert the primary zone into an Active Directory-integrated zone. Delete the secondary zone.
C. Convert the primary zone into an Active Directory-integrated stub zone. Delete the secondary zone.
D. Configure the zone transfer settings of the standard primary zone. Modify the Master Servers lists on
the secondary zone.
Answer: B

Microsoft examen   083-640 examen   083-640 examen   083-640   083-640

NO.8 You network consists of an Active Directory forest named contoso.com. All servers run Windows Server
2008. All domain controllers are configured as DNS servers. The contoso.com DNS zone is stored in the
ForestDnsZones Active Directory application partition.
You have a member server that contains a standard primary DNS zone for dev.contoso.com. You need to
ensure that all domain controllers can resolve names for dev.contoso.com.
What should you do?
A. Create a NS record in the contoso.com zone. B. Create a delegation in the contoso.com zone.
C. Create a standard secondary zone on a Global Catalog server.
D. Modify the properties of the SOA record in the contoso.com zone.
Answer: B

certification Microsoft   083-640 examen   certification 083-640   083-640

NO.9 Your company has a single Active Directory domain named intranet.adatum.com. The domain
controllers run Windows Server 2008 and the DNS server role.
All computers, including non-domain members, dynamically register their DNS records.
You need to configure the intranet.adatum.com zone to allow only domain members to dynamically
register
DNS records.
What should you do?
A. Set dynamic updates to Secure Only.
B. Enable zone transfers to Name Servers.
C. Remove the Authenticated Users group.
D. Deny the Everyone group the Create All Child Objects permission.
Answer: A

certification Microsoft   083-640   083-640   certification 083-640   certification 083-640

NO.10 Your company has a DNS server that has 10 Active Directory integrated zones.
You need to provide copies of the zone files of the DNS server to the security department. What should
you do?
A. Run the dnscmd /ZoneInfo command.
B. Run the ipconfig /registerdns command.
C. Run the dnscmd /ZoneExport command.
D. Run the ntdsutil > Partition Management > List commands.
Answer: C

Microsoft   083-640   083-640 examen

Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Microsoft 083-640 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Microsoft 083-640. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Microsoft 083-640, vous aurez une meilleure préparation avec l'aide de Pass4Test.

Le plus récent matériel de formation Microsoft 70-576

Finalement, la Q&A Microsoft 70-576 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Microsoft 70-576 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Microsoft, vous aurez un meilleur salaire et une plus grande space à se développer.

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 70-576 est lequel très important dans les tests de Certification Microsoft. Pour être qualifié de Microsoft, on doit obtenir le passport de test Microsoft 70-576.

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Microsoft 70-576. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Microsoft 70-576. Choisir le produit de Pass4Test particulier pour le test Certification Microsoft 70-576 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Code d'Examen: 70-576
Nom d'Examen: Microsoft (Designing and Developing Microsoft SharePoint 2010 Applications)
Questions et réponses: 172 Q&As

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Microsoft 70-576. Le guide d'étude de Pass4Test comprend les excercices de Microsoft 70-576 et la Q&A qui peut vous permetrre à réussir 100% le test Microsoft 70-576. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Microsoft 70-576. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Microsoft 70-576. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

L'importance de la position de Certificat Microsoft 70-576 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Microsoft 70-576 par votre première fois.

Avec la version plus nouvelle de Q&A Microsoft 70-576, réussir le test Microsoft 70-576 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

70-576 Démo gratuit à télécharger: http://www.pass4test.fr/70-576.html

NO.1 You are helping an organization ¯ s execu ti ve t ea m t o des i gn an au t o m a t d approval process to
standardize certain documents. You have the following requirements:
The documents must be reviewed and approved by multiple teams in the approval chain.
.Each reviewer must provide feedback as part of completing a review.
.Each reviewer must either approve or reject the documents.
.After review, the document status must be changed; an e-mail must be generated to the document author
and the next reviewer in the approval chain; and a task should be created for the next reviewer in the
approval chain.
You must design a custom workflow solution for the document approval process on a SharePoint 2010
site. What should the solution include?
A. An initiation form to collect the reviewer ¯ s f eedback and a S i m p l e ac ti v it y t o app r ove and r e j ec t t e
document
B. An association form to collect the reviewer ¯ s f eedback and a C o m pos it e ac ti v it y t o suppo rt cond iti ona l
activities such as approval and rejection
C. A task form to collect the reviewer ¯ s f eedback and a C o m pos it e ac ti v it y t o suppo rt cond iti ona
activities
such as approval and rejection
D. A task form to collect the reviewer ¯ s f eedback and a S i m p l e ac ti v it y t o app r ove and r e j ec t t he docu m en
Answer: C

Microsoft examen   70-576   70-576   70-576 examen   70-576

NO.2 You are designing an asset management solution using SharePoint 2010. You need to design a
solution that meets the following requirements:
Binary large objects (BLOBs) cannot be stored in Microsoft SQL Server.
.There can be no custom development or third-party products.
Which approach should you recommend?
A. Install and configure Remote BLOB Storage and enable the content databases to use Remote BLOB
Storage.
B. Install and configure Remote BLOB Storage and enable the configuration databases to use Remote
BLOB Storage.
C. Install and configure an external BLOB store provider and enable the content databases to use the
external BLOB store provider.
D. Install and configure an external BLOB store provider and enable the configuration databases to use
the external BLOB store provider.
Answer: A

Microsoft   70-576   70-576   certification 70-576

NO.3 You need to specify the correct artifacts to use in a SharePoint 2010 application for a school district.
The school district ¯ s ad m i n i s tr a t o r needs t o be ab l e t o sea r ch f o
student information on an intranet
SharePoint 2010 portal.
Student information is currently available in another database, which supports an Open Database
Connectivity(ODBC) driver. You need to design the solution to meet the following requirements:
Provide a user interface to search for a student based on name.
.Enable the administrator to select the correct student name from the search results.
.Provide a student header section that displays the primary student identity information, which will enable
the administrator to correlate any new information with the correct student.
.Provide additional data entry pages to add or update additional student information.
Which approach should you recommend?
A. Design HTML Web pages to render the student details. Install these pages under the
/templates/_layouts/1033 folder and load these pages in Web Parts.
B. Design connected Web Parts to share information among search data entry, student header
information, and new data entry information Web Parts.
C. Design a user control and load this control in a Web Part to search for a student. Then render the
student details in a SharePoint page.
D. Design a Web Part to search for a student. Then render the student record details in a SharePoint
page.
Answer: B

certification Microsoft   70-576   70-576

NO.4 You are using Business Connectivity Services to design a SharePoint 2010 application that connects to
an external database.The database users have accounts for authentication that are different from their
Active Directory accounts. You have a requirement to allow users to connect to the external database
without prompting
the user for credentials. You need to store user credentials and use these credentials when connecting to
the external database. Which approach should you recommend?
A. Create a target application that uses the Microsoft Single Sign-On Service. Select the Connect with
Impersonated Custom Identity option when creating the connection to the database.
B. Create a target application that uses the Secure Store Service. Select the Connect with Impersonated
Custom Identity option when creating the connection to the database.
C. Create a target application that uses the Single Sign-On Service. Select the Connect with User ¯ s
Identity option when creating the connection to the database.
D. Create a target application that uses the Secure Store Service. Select the Connect with User ¯ s I den tit y
option when creating the connection to the database.
Answer: B

Microsoft   70-576   70-576

NO.5 A SharePoint 2010 server farm has a custom feature installed that provides specialized business logic
for a SharePoint solution package. The solution package is being updated to include additional
functionality. Your job is to specify a deployment method for the updates that will:
Add the additional application business logic to the solution package.
.Provide the least downtime for the application.
.Automate the application upgrade a much as possible.
You need to update the solution package with additional business logic and meet all these requirements.
Which
approach should you recommend?
A. Create a new feature containing the new business logic. Use the feature upgrade process to deploy the
solution package by incrementing the version number of the feature in the Feature.xml file.
B. Add the new business logic to the existing feature. Use the feature upgrade process to deploy the
solution package by incrementing the version number of the feature in the Feature.xml file.
C. Use Visual Studio 2010 to add the new business logic to the existing code in the .wsp package for the
feature.
Create two timer jobs - one to retract the current solution package and one to deploy the solution package
with the updated feature.
D. Use the object model to create a custom feature receiver to increment the version property of the
SPFeatureDefinition class. Increment the version number of the current solution in the Feature.xml file.
Answer: B

certification Microsoft   70-576 examen   certification 70-576

NO.6 You are designing a SharePoint 2010 solution. You need to design the solution to meet the following
requirements:
All sites must have a consistent structure when initially created.
.All sites must include a document library that contains Word documents with searchable properties.
.Site users must be able to generate a spreadsheet detailing the properties of the document library
contents.
Which approach should you recommend?
A. Create a feature to create the required site structure programmatically. Create a content type for the
document library. Create a custom workflow for the document library to allow users to generate the
spreadsheet.
B. Create a feature to create the required site structure programmatically. Use feature stapling to
associate the feature with all site definitions. Create a custom action for the standard document library to
allow users to generate the spreadsheet.
C. Create a custom site definition for the sites and allow only that site definition to be used. Create a
content type for the document library. Create a custom action for the document library to allow users to
generate the spreadsheet.
D. Create a custom site definition for the sites and allow only that site definition to be used. Create a
content type for the document library. Create a custom event receiver to allow users to generate the
spreadsheet.
Answer: C

Microsoft examen   certification 70-576   70-576

NO.7 You are designing a SharePoint 2010 feature. The feature includes a feature receiver that executes
code on activation and deactivation. The feature receiver code interacts with a Web service, which could
cause errors beyond your control. You need to ensure that the feature does not activate or deactivate if
the Web service causes an error.
Which approach should you recommend.?
A. Wrap your code in a try-catch block. Log the error and issue another request to the Web service in the
catch block.
B. Wrap your code in a try-catch block. Log the error and throw an exception in the catch block.
C. Wrap your code in a try-catch block. Only catch exceptions of type SPException.
D. Wrap your code in a try-finally block. Log any issues your code encounters in the finally block.
Answer: B

Microsoft   70-576   70-576 examen   certification 70-576

NO.8 You are designing an external binary large object (BLOB) store provider by implementing the ISP
External Binary Provider interface. The farm has existing sites that contain content. Your implementation
has been verified to be working correctly. You need to ensure that content within existing sites is moved
using the external BLOB store provider.
You also must ensure that the solution does not require further custom coding. Which approach should
you recommend?
A. Perform a backup and restore on each site.
B. Perform a backup and restore of each content database.
C. Perform a backup and restore on each site collection.
D. Perform a backup and restore of the configuration database.
Answer: C

certification Microsoft   70-576 examen   certification 70-576   70-576   70-576 examen   70-576 examen

NO.9 You are designing a SharePoint 2010 application. You need to ensure that a custom list named Phone
Numbers is automatically created and added to the site whenever a new Team Site is created. Which
approach should you recommend?
A. Create a feature that defines a Phone Numbers list template. Then activate the feature on the team
site.
B. Create a feature that defines a Phone Numbers list template. Then use feature stapling to associate
the feature with the site definition of the team site.
C. Create the custom Phone Numbers List Template element and add the List Template element to the
onet.xml file of the team site.
D. Create the custom fields, views, and other specifications for the Phone Numbers list definition and add
them to the schema.xml file.
Answer: B

Microsoft   70-576   70-576

NO.10 You are designing a SharePoint 2010 solution for a large sales force. You have the following
requirements:
Each sales region must have its own site within the solution with lists to track the current sales data of the
sales executives.
.These lists must contain information about the status of sales opportunities, the estimated price, the
expected close date, and contact information for the potential sale.
.The welcome page for the root site must display a current summary for all regions, including the
percentage of sales expected to close within the next month and total expected revenue over time. You
need to design the solution to meet all these requirements. What approach should you recommend?
A. Create site columns from the Managed Metadata Services feature within Central Administration to
specify and display the sales information on the root site.
B. Create an event receiver for each list to copy the list data when an item is inserted into a list on the root
site.
Create a List View Web Part to display the sales information on the root site.
C. Create a content type for the metadata to be tracked. Use a Content Query Web Part to display the
sales information on the root site.
D. Create a custom workflow to manage the list item data and update properties on the Web Part to
display the sales information on the root site.
Answer: C

certification Microsoft   certification 70-576   70-576 examen   70-576

NO.11 You are designing a SharePoint 2010 solution to manage statements of work. You need to design the
solution according to the following requirements:
Store the customer ID, purchase order number, estimated completion date, and other fields associated
with specific documents as they are uploaded.
.The information must be created so that it can be set within the Microsoft Word document information
panel.
.Programmatically execute a series of tasks, including assigning tasks to validate the information and
creating team sites, based on information related to each document.
.These tasks must run to completion, even if the server is rebooted.
Which approach should you recommend?
A. Create a document library for a custom content type that contains site columns for the document
information.
Develop a SharePoint workflow for the document library to execute the document tasks.
B. Create a document library for a custom content type that contains site columns for the document
information.
Develop an event receiver for the document library to execute the document tasks.
C. Create a custom list with fields to store the additional items and an attached document. Develop a
SharePoint workflow for the custom list to execute the additional tasks.
D. Create a custom list with fields to store the additional items and an attached document. Develop an
event receiver for the custom list to execute the additional tasks.
Answer: A

certification Microsoft   70-576   70-576 examen   70-576

NO.12 You are designing a SharePoint 2010 application that stores information about each machine in a
factory. This information includes an inventory of parts, the machine ¯ s m a i n t enance h i s t o ry , and a
document library of repair manuals for each machine in Microsoft Word format. The application must:
Establish links between the factory machine data, the machine part inventory, the maintenance history,
and the repair manuals to allow the display of additional fields from the other lists.
.Enforce relational integrity between the data to create custom views for various business users.
.Allow nontechnical users to update the individual list data and views, as well as to update the manuals.
.Enforce relationships that allow cascade deletes of items from the machine parts list when items are
deleted from the machine list, but prevent data in the machine parts list from being orphaned. You need to
design a data access plan that meets all these requirements and allows all data to be managed within the
SharePoint 2010 system.
Which plan should you recommend?
A. Create tables in Microsoft SQL Server for each set of inventories. Create relationships with primary and
foreign keys linking the tables. Use Business Connectivity Services (BCS) to connect SharePoint 2010
lists to these tables to manage the data.
B. Create tables in Microsoft SQL Server for each set of inventories. Create relationships with primary and
foreign keys linking the tables. Store machine part manuals in a Share Point document library and use
event receivers to synchronize data in the lists and libraries.
C. Use SharePoint 2010 lists and document libraries to store data. Create relationships using lookup
fields and relationship joins between the lists and document libraries.
D. Use SharePoint 2010 lists and document libraries to store data. Create a custom workflow to update
information in the lists and document libraries.
Answer: C

Microsoft   70-576 examen   70-576 examen   70-576

NO.13 You are designing a SharePoint 2010 application that includes a Task list. You have the following
requirements:
For each task, allow users to specify one of three values for an item named Phase using a drop-down
menu.
.Allow contributors to add new values for the Phase item. You need to design this application without
using custom code. Which approach should you recommend?
A. Create a Multiple lines of text field type on the Task list.
B. Create a Single line of text field type on the Task list.
C. Create a Choice field type on the Task list that gets values from a custom list.
D. Create a Lookup field type on the Task list that gets values from a custom list.
Answer: D

Microsoft   certification 70-576   certification 70-576

NO.14 You are designing a SharePoint 2010 solution that allows users to enter address information for
contacts into a list named Address. You have the following requirements:
Ensure that users enter full nine-digit zip codes for the address information.
.Display a custom message indicating that a zip code is invalid if the entered zip code does not match the
full nine-digit requirements. You need to ensure that the application is designed to meet these
requirements.
Which approach should you recommend?
A. Create a custom command.
B. Create a Datasheet view on the Address list.
C. Use the Form Options of the Address list.
D. Create a formula on the column.
Answer: D

certification Microsoft   70-576   70-576   certification 70-576

NO.15 You are designing a SharePoint 2010 solution that stores employee information in a list named
Employees and company information in a list named Company. Each company has one or more
employees. You need to recommend that a developer add a new column so that a one-to-many
relationship is created between the Company list and Employees list. Which approach should you
recommend?
A. Add an External Data column on the Employees list.
B. Add a Lookup column on the Employees list.
C. Add a Managed Metadata column on the Company list.
D. Add a Lookup column on the Company list.
Answer: B

certification Microsoft   70-576 examen   70-576 examen   70-576

NO.16 You are designing a SharePoint 2010 application to store 50 GB of digital assets, including audio and
video files that are up to 20 MB in size. You have the following requirements:
The disk storage system must use standard hard drives and must be configured to optimize read
performance.
.The SharePoint 2010 database uses Microsoft SQL Server Express 2008.
.The application must leverage standard SharePoint 2010 components to limit the requirement for custom
development.
You need to design a storage solution that meets all of these requirements. Which approach should you
recommend?
A. Enable FILESTREAM storage for a Microsoft SQL Server Express 2008 database on a RAID 0 disk
system.
Then install and configure remote Binary Large Object (BLOB) storage in SharePoint 2010.
B. Store the assets directly in Microsoft SQL Server Express 2008 and create multiple content databases
on a RAID 0 disk system.
C. Install and configure support for external BLOB storage for SharePoint 2010 and use the
ISPExternalBinaryProvider interface to manage files on a RAID 0 disk system.
D. Install and configure support for external BLOB storage for SharePoint 2010 and configure a Microsoft
SQL
Server Express 2008 database to store BLOBs on a RAID 5 disk system.
Answer: A

Microsoft   70-576   70-576 examen

NO.17 You are designing a custom SharePoint 2010 solution package. It will include a feature that contains a
Web Part,which requires a custom assembly for its functionality. You need to design the feature based on
the following requirements:
The Web Part must be a partial trust application and support a custom Code Access Security (CAS)
policy.
.The solution package must be deployed without the need of farm-level administrator permissions.
Which approach should you recommend?
A. Create the Web Part feature and deploy the required assembly to the bin directory of only the Web
applications that require it. Then delegate administration to the site administrator. Lastly, create a custom
CAS policy file and point to it the web.config file of the application.
B. Create the Web Part feature assembly with a strong name and deploy it using a .wsp file to the
_app_bin directory of all Web applications where it is needed. Then activate it using delegated
administration.
C. Create an assembly with a strong name and deploy it to the global assembly cache at the farm level.
Activate the feature at the site collection level with delegated administration.
D. Create the Web Part feature as a sandboxed solution.
Answer: D

Microsoft examen   70-576 examen   70-576   70-576   70-576 examen   70-576

NO.18 You are designing a solution that includes a custom list on a SharePoint 2010 site. You need to design
the solution to meet the following requirements:
The solution needs to add customized files to the site as part of the list provisioning.
.The list should only be provisioned in the sites of the site collection where it is specifically needed.
.The files must no longer remain provisioned in the site if the custom list is removed.
Which approach should you take?
A. Design a custom list. Implement list event receivers to add the custom files to the bin directory of the
Web application.
B. Design a custom feature solution. Implement feature event receivers on the Activate action to add files
to the site.
C. Design a custom feature solution. Implement feature event receivers on these two actions:
Install action to add files
Uninstall action to delete the files that were added during installation of the feature
D. Design a custom feature solution. Implement feature event receivers on these two actions:
Activate action to add the files
Deactivate action to delete the files that were added during activation of the feature
Answer: D

certification Microsoft   70-576   certification 70-576   certification 70-576

NO.19 You are designing a SharePoint 2010 information architecture plan for a client that specifies the
mechanics of implementing content type change control. The requirements for the change control plan
specify that:
Site managers can create site-specific content types based on the content types in the parent site.
.Content types must not be overwritten when changes are made to parent site content types.
.Site managers can change child site content types.
You need to specify a content type change control plan that meets all these requirements. Which
approach should you recommend?
A. Direct the site manager to explicitly set the read-only property of the content type to true. Direct the site
collection manager to make the specified change required in the child site to the content type at the site
collection level.
B. Direct the site manager to explicitly set the read-only property of the content type to true. Perform a
push-down operation from the parent site to overwrite the required changes to the read-only content types
in all the child sites.
C. Define the content type as read-only at the child site level. Direct the site manager to explicitly set the
readonly property of the content type to false to make changes to the content type. Then change the
read-only property to true.
D. Define the content type as sealed. Direct the site manager to explicitly set the sealed property of the
content type to false to make changes to the content type. Then change the sealed property of the
content type to true.
Answer: C

Microsoft   70-576   certification 70-576   70-576   70-576 examen

NO.20 You are designing a SharePoint 2010 site. You need to design the site to meet all the following
requirements:
Your business requires a consistent structure to manage sales proposal documents across all account
teams.
.The sales director must ensure that all sales documents conform to the same template.
.All sales proposals must be reviewed and approved by the sales manager.
.Every site must be created with a document library, a list of the account team members, and the account
status.
Which approach should you recommend?
A. Design a site template with a standard list of account team members and a shared document library to
hold the proposal documents.
B. Design a proposal content type to store proposal document metadata and a shared document library to
hold the proposal documents.
C. Design a proposal content type to include required metadata information about the proposal
documents. Also design a site template with a standard document library and account team members list
for consistency across all account teams.
D. Design a content type that uses a Microsoft Word template for proposal documents. The content type
includes required metadata. Also design a site template with a customized document library and list for
consistency across all account teams.
Answer: D

Microsoft   certification 70-576   certification 70-576

Pour vous laisser savoir mieux que la Q&A Microsoft 70-576 produit par Pass4Test est persuadante, le démo de Q&A Microsoft 70-576 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Microsoft 70-576 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

MB4-641 dernières questions d'examen certification Microsoft et réponses publiés

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Microsoft MB4-641, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Microsoft MB4-641 très tôt. Pass4Test peut vous permettre à réussir 100% le test Microsoft MB4-641, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test Microsoft MB4-641 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test Microsoft MB4-641, votre argent sera tout rendu.

Vous n'avez besoin que de faire les exercices à propos du test Microsoft MB4-641 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.

Code d'Examen: MB4-641
Nom d'Examen: Microsoft (SL 7.0 Tools for VB)
Questions et réponses: 60 Q&As

MB4-641 Démo gratuit à télécharger: http://www.pass4test.fr/MB4-641.html

NO.1 Which statement is true about Record Maintenance?
A. This utility program actually creates new tables in the Microsoft Dynamics SL database.
B. This utility is used to define the following properties of a table: Name, Fields and Indexes.
C. This utility lets a developer define the names of new tables. It does not actually create tables
in the Microsoft Dynamics SL database.
D. This utility reads the database schema from the Microsoft Dynamics SL database and displays
all tables in that database except for MS SQL system tables. WArialTahomaZ
Answer: C

Microsoft   certification MB4-641   MB4-641   MB4-641 examen   MB4-641

NO.2 When you add new tables to the Microsoft Dynamics SL database, which restrictions must you
follow? Choose the 2 that apply.
A. Table names must not contain spaces.
B. Table names must not begin with a number.
C. Table names cannot be longer than 8 characters
D. Table names must contain a special character. WArialTahomaZ
Answer: A, B

Microsoft examen   certification MB4-641   certification MB4-641   MB4-641

NO.3 As Soon As the user selects a company from the Logon screen they will be connected to two
databases, an application and system database. What kind of information is contained in the
System Database? Choose the 3 that apply.
A. Product Registration
B. Accounting Information
C. Customizations
D. Users and Groups WArialTahomaZ
Answer: A, C, D

Microsoft   MB4-641   MB4-641   MB4-641 examen   MB4-641

NO.4 What utility can be used to create text files which contain VB Code and SQL statements that
will
create a table? The extensions of the two files that are created will be "DH", "VB" and "CRT".
A. Generate Schema
B. Record Maintenance
C. Parent.exe
D. Field Maintenance WArialTahomaZ
Answer: A

certification Microsoft   certification MB4-641   MB4-641   MB4-641

NO.5 If you are adding a level that accesses an existing Microsoft Dynamics SL table, most likely a
stored procedure will already have been created to support possible values lookups for that table.
What file would you search to locate a suitable stored procedure?
A. PVREC.csv
B. PVRE
C. crt C. PVREC.crp
D. PVREC. glb WArialTahomaZ
Answer: A

Microsoft   MB4-641   MB4-641   MB4-641   MB4-641   MB4-641

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Microsoft MB4-641 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Microsoft MB4-641.

Microsoft MB7-846 examen pratique questions et réponses

La Q&A Microsoft MB7-846 de Pass4Test est liée bien avec le test réel de Microsoft MB7-846. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test Microsoft MB7-846 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.

Pass4Test est un site à offrir particulièrement la Q&A Microsoft MB7-846, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Microsoft MB7-846, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Microsoft MB7-846 et même se renforcer vos connaissances professionnelles IT.

Les produits de Pass4Test sont préparés pour le test Certification Microsoft MB7-846, y compris les formations et les informations ciblées au test Microsoft MB7-846. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Est-ce que vous vous souciez encore pour passer le test Microsoft MB7-846? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Microsoft MB7-846, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Microsoft MB7-846. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

Code d'Examen: MB7-846
Nom d'Examen: Microsoft (NAV 2009 Relationship Management)
Questions et réponses: 50 Q&As

MB7-846 Démo gratuit à télécharger: http://www.pass4test.fr/MB7-846.html

NO.1 What must you set up in Relationship Management to synchronize customers, vendors, and bank
accounts with contacts?
A. Interaction IDs
B. Duplicates
C. Inheritance codes
D. Business relation codes
Answer: D

certification Microsoft   certification MB7-846   MB7-846   certification MB7-846

NO.2 You are a sales manager for a company that has just upgraded to Microsoft Dynamics NAV 2009. You
are setting up Relationship Management and need to set up e mail logging to trace your e mail
messages with contacts, customers, and vendors. Where can you define all of the e mail logging setup
options?
A. Role Center
B. Marketing Setup window in the RoleTailored client
C. Marketing Setup window in the Classic client
D. Interaction Template Setup window in the Classic or RoleTailored client
Answer: C

Microsoft examen   certification MB7-846   certification MB7-846   MB7-846   MB7-846

NO.3 What must you set up in the Interaction Template Setup window for the program to automatically log
outgoing phone calls you make as an interaction?
A. Synchronization with customers and vendors
B. Interaction template code
C. Logging user ID
D. Correspondence type
Answer: B

Microsoft examen   MB7-846 examen   MB7-846

NO.4 Which of the following activities in Microsoft Dynamics NAV 2009 can be automatically recorded as an
interaction?
A. Creating a finance charge memo
B. Archiving a sales order
C. Posting a purchase order
D. Printing a purchase receipt
Answer: D

Microsoft   certification MB7-846   MB7-846 examen

NO.5 Which of the following Relationship Management entities are processed by the program when you
search for a contact using the Contact Search feature? Choose the 3 that apply.
A. Contacts
B. Campaigns
C. To dos
D. Comments
Answer: A, C, D

Microsoft examen   MB7-846   MB7-846 examen

Le test Microsoft MB7-846 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Microsoft MB7-846. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Microsoft MB7-846. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.