Le test Cisco 642-902 est l'un très improtant dans tous les tests de Certification Cisco, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Cisco 642-902. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Cisco 642-902. Choisir le produit de Pass4Test particulier pour le test Certification Cisco 642-902 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
Code d'Examen: 642-902
Nom d'Examen: Cisco (Implementing cisco ip routing)
Questions et réponses: 375 Q&As
La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test Cisco 642-902.
Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Cisco 642-902.
Dépenser assez de temps et d'argent pour réussir le test Cisco 642-902 ne peut pas vous assurer à passer le test Cisco 642-902 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.
642-902 Démo gratuit à télécharger: http://www.pass4test.fr/642-902.html
NO.1 Using the rules for IPv6 addressing, how can the address
2031:0000:240F:0000:0000:09C0:123A:121B be rewritten?
A. 2031:0:240F::09C0:123A:121B
B. 2031::240F::09C0:123A:121B
C. 2031::240F:9C0::123A:121B
D. 2031::240F:::09C0:123A:121B
Answer: A
Cisco examen 642-902 642-902
NO.2 What are two rules for compacting IPv6 addresses? (Choose two.)
A. The maximum number of times a double colon can replace a 16-bit segment that consists of all zeroes
is two.
B. The leading zeroes in any 16-bit segment do not have to be written.
C. Every 16-bit segment that consists of all zeroes can be represented with a single colon.
D. The trailing zeroes in any 16-bit segment do not have to be written.
E. Any single, continuous string of one or more 16-bit segments that consists of all zeroes can be
represented with a double colon.
F. Two zeroes in the middle of any 16-bit segment do not have to be written.
Answer: BE
Cisco certification 642-902 642-902
NO.3 Refer to the exhibit. On the basis of the information in the exhibit, which two statements are true?
(Choose two.)
A. The output was generated by entering the show ip bgp command on the ISP router.
B. The output was generated by entering the show ip bgp command on the SanJose1 router.
C. The serial 0/0/1 interface on the ISP router has been configured with the set metric 50 command.
D. The serial 0/0/1 interface on the ISP router has been configured with the set metric 75 command.
E. When traffic is sent from the ISP to autonomous system 64512, the traffic will be forwarded to
SanJose1 because of the lower MED value of SanJose1.
F. When traffic is sent from the ISP to autonomous system 64512, the traffic will be forwarded to
SanJose2 because of the higher MED value of SanJose2.
Answer: AE
Cisco 642-902 certification 642-902 certification 642-902
NO.4 Refer to the output.
What IOS command produces this output? .
A. show ip ospf
B. show ip ospf interface
C. show ipv6 ospf interface
D. show ipv6 ospf
Answer: D
Cisco certification 642-902 642-902 examen
NO.5 Into which two types of areas would an area border router (ABR) inject a default route.? (Choose two.)
A. the autonomous system of a different interior gateway protocol (IGP)
B. area 0
C. totally stubby
D. NSSA
E. stub
F. the autonomous system of an exterior gateway protocol (EGP)
Answer: CE
certification Cisco 642-902 642-902 examen certification 642-902 642-902 examen
NO.6 Refer to the exhibit.
Router RTA is the hub router for routers RTB and RTC. The Frame Relay network is configured with
EIGRP, and the entire network is in autonomous system 1. However, router RTB and RTC are not
receiving each other's routes. What is the solution?
A. Configure the auto-summary command under router eigrp 1 on router RTA.
B. Issue the no ip split-horizon command on router RTA.
C. Configure subinterfaces on the spoke routers and assign different IP address subnets for each
subinterface.
D. Check and change the access lists on router RTA.
E. Issue the no ip split-horizon eigrp 1 command on router RTA.
F. Configure a distribute-list on router RTA that allows it to advertise all routes to the spoke routers.
Answer: E
Cisco 642-902 examen 642-902 certification 642-902
NO.7 Refer to the exhibit. Router RT-1 chooses one path to network 198.133.219.0/24. Indicate the reason
Router RT-1 chooses this "best" path.
A. In making its decision about the best path, RT-1 gives precedence to the origin code.
B. In making its decision about the best path, RT-1 gives precedence to the BGP MED values.
C. IP address 128.107.2.2 is lower than 128.107.255.2.
D. In making its decision about the best path, RT-1 prefers the IGP metrics.
E. RT-1 prefers internal BGP routes.
F. IP address 128.107.254.2 is lower than 128.107.255.2.
Answer: A
Cisco examen certification 642-902 certification 642-902
NO.8 Refer to the exhibit.
On the basis of the configuration that is provided, how would the BGP updates that come from router R1
be replicated inside autonomous system 65200?
A. All BGP updates that are received on router R2 will be sent to routers R3 and R4. Routers R3 and R4
will then forward those BGP updates to router R5.
B. All BGP updates that are received on router R2 will not be sent to routers R3 and R4.
C. All BGP updates that are received on router R2 will be sent directly to router R5.
D. None of the BGP updates that are received on router R2 will ever be received by router R5.
Answer: D
Cisco examen 642-902 certification 642-902 642-902
NO.9 How is authentication handled with OSPFv3?
A. OSPFv3 for IPv6 authentication is supported by SHA-1 authentication.
B. OSPFv3 for IPv6 authentication is supported by MD5 authentication.
C. OSPFv3 for IPv6 authentication is supported by IPv6 IPsec.
D. OSPFv3 for IPv6 authentication is supported by IPv4 IPsec.
Answer: C
Cisco examen 642-902 certification 642-902 certification 642-902
NO.10 Which three restrictions apply to OSPF stub areas? (Choose three.)
A. No virtual links are allowed.
B. The area cannot be a backbone area.
C. Redistribution is not allowed unless the packet is changed to a type 7 packet.
D. The area has no more than 10 routers.
E. No autonomous system border routers are allowed.
F. Interarea routes are suppressed.
Answer: ABE
Cisco 642-902 642-902 642-902 examen
NO.11 A router has two paths to reach another network in a different autonomous system. Neither route was
generated by the local router and both routes have the same default weight and local preference values.
Which statement is true about how BGP would select the best path?
A. If the command bgp always-compare-med has been given, then the router will prefer the route with the
highest MED.
B. The router will prefer the route with the lower MED.
C. The router will prefer the shortest autonomous system path.
D. To influence one route to be preferred, its default local preference value will be changed via the use of
the command bgp default local-preference 50.
Answer: C
Cisco 642-902 examen 642-902
NO.12 What is the difference between the IPv6 addresses ::/0 and ::/128?
A. ::/0 is the unspecified address, and ::/128 is the multicast address.
B. ::/0 is the unicast address, and ::/128 is the anycast address.
C. ::/0 is the unicast address, and ::/128 is the multicast address.
D. ::/0 is the anycast address, and ::/128 is the multicast address.
E. ::/0 is the default route, and ::/128 is the unspecified address.
F. ::/0 is the anycast address, and ::/128 is the default address.
Answer: E
Cisco examen 642-902 642-902 642-902 examen
NO.13 Refer to the exhibit.
Which two statements are correct? (Choose two.)
A. All six routes will be installed in the routing table.
B. Two routes will be installed in the routing table.
C. Four routes will be installed in the routing table.
D. All the routes were redistributed into BGP from an IGP.
E. All the routes were originated by BGP with the network command.
Answer: CD
Cisco examen 642-902 certification 642-902 642-902
NO.14 What two situations could require the use of multiple routing protocols? (Choose two)
A. when using UNIX host-based routers
B. when smaller broadcast domains are desired
C. because having multiple routing protocols confuses hackers
D. when migrating from an older Interior Gateway Protocol (IGP) to a new IGP
E. when all equipment is manufactured by Cisco
F. when there are multiple paths to destination networks
Answer: AD
Cisco certification 642-902 642-902 examen
NO.15 During BGP configuration on a router that has peered with other BGP speakers, the BGP command
aggregate-address 172.32.0.0 255.255.252.0 is issued. However, the peers do not receive this aggregate
network in BGP advertisements. Also, the router does not have this aggregate network in its BGP table.
Which option indicates a possible reason this command did not cause the router to advertise the
aggregate network to its peers?
A. Interface NULL 0 is likely shutdown.
B. The BGP command no synchronization is missing.
C. The BGP command no auto-summary is missing.
D. Subnets of 172.32.0.0/22 do not exist in the BGP table.
E. The IGP running on this router does not have network 172.32.0.0/22 installed.
F. The next hop IP address must be a loopback address.
Answer: D
Cisco examen 642-902 642-902 certification 642-902 certification 642-902
NO.16 Refer to the partial configurations in the exhibit. What address is utilized for DR and BDR identification
on Router1?
A. the serial 1/1 address
B. the serial 2/0 address
C. a randomly generated internal address
D. the configured router-id address
Answer: D
Cisco 642-902 examen certification 642-902
NO.17 Refer to the exhibit.
Which two statements are true about the partial configuration that is provided. (Choose two.)
A. All the configured neighbors are in autonomous system 100.
B. The peer group shortens the IBGP configuration.
C. The peer group shortens the EBGP configuration.
D. Only the outgoing filters are applied to BGP updates.
E. Three AS-path filters are applied to each BGP neighbor.
Answer: AB
Cisco 642-902 642-902 642-902 certification 642-902
NO.18 What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network in the show ip bgp
command output? (Choose two.)
A. The network was originated via redistribution of an interior gateway protocol into BGP.
B. The network was defined by a static route.
C. The network was originated via a network or aggregate command.
D. The network was learned via EBGP.
E. The network was learned via IBGP.
Answer: AC
Cisco 642-902 certification 642-902
NO.19 Refer to the exhibit.
Which statement is true?
A. Router RAR1 will accept only route 10.10.0.0/19 from its BGP neighbor.
B. Router RAR1 will send only route 10.10.0.0/19 to its BGP neighbor.
C. Only traffic with a destination from 10.10.0.0/19 will be permitted.
D. Only traffic going to 10.10.0.0/19 will be permitted.
Answer: A
Cisco 642-902 examen 642-902
NO.20 Refer to the exhibit. Router RT-1 and router RT-2 both advertise network 131.25.0.0/16 to router RT-3
via internal BGP. What is the reason that router RT-3 chose router RT-1 as its best path to network
131.25.0.0/16.
A. It advertises the best AS-path.
B. It advertises the best origin code.
C. It advertises the best MED.
D. It advertises the best local preference.
E. It has a better router ID.
F. It advertises a lower autonomous system.
Answer: E
certification Cisco 642-902 examen certification 642-902 642-902
Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Cisco 642-902 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Cisco 642-902. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Cisco 642-902, vous aurez une meilleure préparation avec l'aide de Pass4Test.
没有评论:
发表评论