Si vous traviallez dur encore pour préparer le test de Avaya 6102-1 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Avaya 6102-1.
Le test Avaya 6102-1 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test Avaya 6102-1. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.
Code d'Examen: 6102-1
Nom d'Examen: Avaya (Avaya Virtual Services Platform 9000 Implementation Exam)
Questions et réponses: 67 Q&As
Le Certificat de Avaya 6102-1 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Avaya 6102-1, c'est-à-dire avoir une grande fortune. Le Certificat Avaya 6102-1 peut bien tester des connaissances professionnelles IT. La Q&A Avaya 6102-1 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test Avaya 6102-1 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test Avaya 6102-1, votre argent sera tout rendu.
La Q&A de Pass4Test vise au test Certificat Avaya 6102-1. L'outil de formation Avaya 6102-1 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.
6102-1 Démo gratuit à télécharger: http://www.pass4test.fr/6102-1.html
NO.1 Which types of packets will port mirroring not capture.?
A. Packets that are dropped on the ingress MAC
B. Packets that are destined for the standby CP
C. Packets that are properly forwarded through the VSP
D. Packets that have a destination address of 255.255.255.255
Answer: A
Avaya 6102-1 certification 6102-1 6102-1
NO.2 A customer is mirroring multiple ports to a single monitor port.
What happens if the mirrored traffic exceeds the bandwidth of the monitor port?
A. The traffic will be buffered until there is available bandwidth.
B. The excess traffic will be dropped randomly.
C. The excess traffic will be dropped based upon the mirror priority of the ingress port.
D. The excess traffic will be dropped based upon the port priority of the ingress port.
Answer: B
Avaya 6102-1 examen 6102-1 examen 6102-1
NO.3 Which two management ports are available on the CP module? (Choose two.)
A. Serial interface
B. USB (host) interface
C. Ethernet interface
D. Modem interface
Answer: A,D
Avaya 6102-1 examen 6102-1 examen 6102-1
NO.4 Internet Group Management Protocol (IGMP) is used by the IP Multicast router, to
learn about the
existence of host group members on their directly attached subnets.
Which statement about IGMP is true?
A. The IP Multicast routers get this information by listening for IP hosts broadcasting IGMP
queries and
reporting their host group memberships.
B. The IP Multicast routers get this information by broadcasting IGMP queries and listening
for IP hosts
reporting their host group memberships.
C. The IP Multicast routers get this information by recognizing the modified MAC address of a
Multicast
packet and adding that MAC address to the Multicast tree.
D. The IP Multicast routers get this information by listening for Multicast Servers broadcasting
IGMP
queries and listening for IP hosts reporting their host group memberships.
Answer: B
Avaya 6102-1 6102-1 certification 6102-1 6102-1 certification 6102-1
NO.5 A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in
the existing
Virtual Services Platform (VSP) 9000 core. The technician needs to configure VRF on the
VSP 9000.
Which statement represents the proper order for configuring a new VRF?
A. Create a new VLAN, add an IP address, create a VRF, and move the VLAN to the new
VRF.
B. Create a VRF, add an IP address, create a new VLAN, and move the VLAN to the new
VRF.
C. Create a VRF, create a new VLAN, add an IP address, and move the VLAN to the new
VRF.
D. Create VRF, create a new VLAN, move the VLAN to the new VRF, and add an IP
address.
Answer: D
Avaya examen 6102-1 certification 6102-1 6102-1 6102-1 certification 6102-1
NO.6 A Split Multi Link Trunking (SMIT) for switch clustering is being configured.
Which statement is a configuration requirement for the SMIT?
A. The CP-Limit is configured on edge switch stacks.
B. VLANs that are defined on the SMLT are also defined on the tote IST.
C. Neighboring edge switch stacks should be connected to each other via the DMLT
connection to add
resilient paths in the event of an SMLT failure.
D. Alternate the primary path of the SMLT connection Lo load balance the switch core.
Answer: B
Avaya examen 6102-1 certification 6102-1 6102-1 examen
NO.7 Which command can be used to determine the management IPv6 address on the
Virtual Services
Platform (VSP) O000?
A. Show interfaces mgmtEthernet 1/1
B. Show ip interface vrf mgmtRouter
C. Show ipv6 interface vrf mgmtRouter
D. Show ipv6 address interface
Answer: D
Avaya certification 6102-1 6102-1 examen certification 6102-1 certification 6102-1
NO.8 Given the following ACL applied to an interface:
filter acl ace 1 5 name "xxxx" filter acl ace action 1 5 deny
filter acl ace ip 1 5 ip-protocol-type eq tcp
filter acl ace protocol 1 5 dst-port eq 23
filter acl ace 1 5 enable
What is the result of this filter?
A. permit telnet traffic
B. deny ftp traffic
C. permit only tcp traffic
D. deny telnet traffic
E. deny only tcp traffic
Answer: D
Avaya examen 6102-1 6102-1 6102-1
NO.9 A Virtual Services Platform (VSP) 9000 chassis has the following connections:
Four 10GBaseER core connections in ports 3/4 , 3/8, 4/4, 4/8 (9024XL cards)
40 Copper 100BaseT connections for server aggregation (9048GT card)
How many Switch Fabric (SF) modules need to be installed in the roar of the chassis to
ensure that all of
the IO cards operate at full performance, even if a single SF modules fails (n + 1 SF
redundancy)?
A. Install three SFs in St modules 1, 2, 4.
B. Install four SFs in SF modules 1, 2, 3, 4.
C. Install five SFs in SF modules 1, 2, 3, 4, 5.
D. Install six SFs in SF modules 1, 2, 3, 4, 5, 6.
Answer: D
Avaya 6102-1 6102-1 examen certification 6102-1
NO.10 Avaya recommends that the Switch Fabric (SF) modules be installed in both Slot SF1
and Slot SF4.
What is the reason behind this recommendation?
A. It provides optimal load balancing between the SF modules.
B. It provides redundancy tor the bandwidth management.
C. It takes full advantage of the orthogonal midplane architecture.
D. It provides redundancy in case of a power supply failure.
E. It provides lossless SF failover.
Answer: B
Avaya 6102-1 6102-1 examen 6102-1 6102-1
Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
没有评论:
发表评论