2014年3月28日星期五

Guide de formation plus récente de HP HP0-J51

Pass4Test est un site à offrir particulièrement la Q&A HP HP0-J51, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification HP HP0-J51, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test HP HP0-J51 et même se renforcer vos connaissances professionnelles IT.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test HP HP0-J51. Pass4Test a une expérience riche pour répondre les demandes des candidats.

Code d'Examen: HP0-J51
Nom d'Examen: HP (Installing HP StorageWorks Solutions)
Questions et réponses: 123 Q&As

Le Certificat de HP HP0-J51 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat HP HP0-J51, c'est-à-dire avoir une grande fortune. Le Certificat HP HP0-J51 peut bien tester des connaissances professionnelles IT. La Q&A HP HP0-J51 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification HP HP0-J51. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test HP HP0-J51.

Pass4Test est un seul site web qui peut offrir toutes les documentations de test HP HP0-J51. Ce ne sera pas un problème à réussir le test HP HP0-J51 si vous préparez le test avec notre guide d'étude.

HP0-J51 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J51.html

NO.1 A customer wants to add a drive enclosure to his existing P2000 G3 system. What is the maximum
distance allowed between enclosures?
A. 1m
B. 2m
C. 5m
D. 10m
Answer: B

HP   HP0-J51 examen   HP0-J51

NO.2 Which D2D network configuration mode will improve the availability of overall network bandwidth?
A. Single Port Configuration
B. Dual Port Configuration
C. High Availability (Port Failover) Configuration
D. High Availability (Link Aggregation) Configuration
Answer: D

HP examen   HP0-J51 examen   HP0-J51   HP0-J51 examen

NO.3 The HP P2000 G3 FC Storage Array supports both the MSA70 and D2700 disk enclosures. When
connecting these enclosures to the P2000 G3 FC controller, where can the MSA70 enclosure be cabled
without limiting performance?
A. any location
B. before all D2700 enclosures
C. after all D2700 enclosures
D. after the first D2700 enclosure
Answer: C

HP   HP0-J51 examen   certification HP0-J51   HP0-J51 examen

NO.4 A customer has two HP P2000 G3 FC arrays. One is located at a remote branch office. You have been
asked to configure a replication set between the two arrays. Which components are required to form a
replication set? (Select two.)
A. external view volume
B. primary view volume
C. host accessible remote volume
D. destination snap pool
E. source snapshot
Answer: A,D

certification HP   HP0-J51 examen   HP0-J51   HP0-J51

NO.5 In the Storage Management Utility for a P2000 G3, which wizards are available to allow you to quickly
and easily set up the system? (Select two.)
A. Drive Wizard
B. Configuration Wizard
C. Replication Setup Wizard
D. Hosts Wizard
E. Physical Setup Wizard
Answer: B,C

HP   HP0-J51   HP0-J51   HP0-J51

NO.6 What is a feature of P4000 snapshots?
A. Snapshots are thin provisioned but can be made fully provisioned after being created.
B. As the original volume data changes the snapshot remains the same as the volume at its creation time.
C. The same amount of space is reserved for the snapshot as the original volume.
D. The snapshot is thinly provisioned and requires no reserve space.
Answer: D

HP   HP0-J51   certification HP0-J51   certification HP0-J51

NO.7 When running diagnostics on a P4000 system you notice that the "BBU Capacity Test" is unchecked by
default. Why is this? (Select two.)
A. The test is not supported on any P4000 system.
B. The test can take up to 24 hours to complete.
C. The test can overwrite HDD data.
D. The test sends data to HP via the Internet.
E. The test turns off the controller's cache.
Answer: B,E

HP   HP0-J51 examen   HP0-J51 examen

NO.8 A consultant meets with a customer to define a Disaster Recovery plan based on HP VLS technology.
What are the most important parameters the consultant must obtain from the customer.? (Select two.)
A. Recovery Point Objective
B. Restore Point Objective
C. Recovery Time Objective
D. Retention Point Objective
E. Retention Time Objective
Answer: A,C

certification HP   HP0-J51   certification HP0-J51   HP0-J51   HP0-J51 examen

NO.9 What is the recommended minimum block size that should be configured when backing up to D2D
systems?
A. 64KB
B. 128KB
C. 256KB
D. 1MB
Answer: A

HP examen   HP0-J51   certification HP0-J51

NO.10 Where can you find the DHCP-assigned IP address on your D2D system during initial
configuration?
A. Web Management Interface
B. VGA Console
C. Telnet
D. CommandView TL
Answer: B

HP   HP0-J51   HP0-J51   HP0-J51 examen

NO.11 Your customer wants to monitor the performance of a P4000 G2 system. What is the minimum time
sample interval that can be set using the Performance Monitor?
A. 1 second
B. 5 seconds
C. 30 seconds
D. 1 minute
Answer: B

HP   certification HP0-J51   HP0-J51   HP0-J51 examen   HP0-J51

NO.12 Which browser is supported to access X1000 Windows Server Remote Administration Applet from a
non-Microsoft computer?
A. Apple Safari
B. Google Chrome
C. Microsoft Internet Explorer
D. Mozilla Firefox
Answer: D

HP   HP0-J51 examen   HP0-J51   HP0-J51

NO.13 You are meeting with a customer who has many different backup applications and operating systems.
To identify which operating systems are supported with each backup application by VLS and D2D, which
HP document should you consult?
A. Storage Compatibility Matrix
B. EBS Compatibility Matrix
C. Backup Solutions Guide
D. Storage Backup Matrix
Answer: B

HP   HP0-J51   HP0-J51

NO.14 Which CLI command is used to verify the setting of the IP address of a P2000 G3 Storage Array?
A. show ip-address
B. show network-parameters
C. show network-address
D. show network
Answer: B

certification HP   HP0-J51   HP0-J51 examen   certification HP0-J51   HP0-J51 examen

NO.15 In an HP P2000 storage array, the Drive Spin Down (DSD) feature can reduce power consumption by
powering down drive spindles. Which statements correctly describe the DSD feature? (Select two.)
A. Disk scrubbing is disabled when DSD is enabled.
B. Only RAID configured vdisks can be spun down.
C. Drive Spin Down delay defaults to 15 minutes.
D. Default state is enabled.
E. Only drives that reside in vdisks can be spun down.
Answer: A,C

certification HP   HP0-J51 examen   HP0-J51   HP0-J51

NO.16 Which HP P4000 management tool should you use to gather storage system status information?
A. Centralized Management Console (CMC)
B. HP Integrated Lights Out (ILO)
C. Web Based Enterprise Management (WBEM)
D. System Management Homepage (SMH)
Answer: A

HP   HP0-J51   HP0-J51 examen   HP0-J51   HP0-J51

NO.17 A consultant is discussing with a customer how to create a four node multi-site cluster with the P4000
G2 family of products. The customer wants two physical sites, one being the primary. What is the
minimum total number of managers that should be run to guarantee quorum?
A. 2
B. 3
C. 4
D. 5
Answer: B

certification HP   HP0-J51   HP0-J51 examen   HP0-J51 examen   certification HP0-J51

NO.18 Which method of deduplication is used in the HP StoreOnce D2D devices?
A. fixed-length data segmenting
B. variable-length data segmenting
C. object-level differencing
D. hash-based chunking
Answer: D

HP examen   HP0-J51   HP0-J51   HP0-J51 examen

NO.19 What information is displayed in the Configuration View panel overview of the P2000 SMU about the
status of any FC hosts attached to it? (Select two.)
A. connection type
B. WWPN
C. HBA Firmware revision
D. operating system
E. profile
Answer: B,E

HP examen   HP0-J51   HP0-J51   certification HP0-J51

NO.20 Which P2000 G3 Combo FC/iSCSI controller ports would be most suitable for replicating snapshots to
remote locations?
A. 1GbE iSCSI
B. 10GbE iSCSI
C. 4Gb FC
D. 8Gb FC
Answer: A

certification HP   HP0-J51   certification HP0-J51   certification HP0-J51   HP0-J51

La Q&A de Pass4Test vise au test Certificat HP HP0-J51. L'outil de formation HP HP0-J51 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.

没有评论:

发表评论