2014年4月30日星期三

920-159 dernières questions d'examen certification Nortel et réponses publiés

Obtenez la Q&A de test Nortel 920-159 de Pass4Test plus tôt, vous pouvez réussir le test Certification Nortel 920-159 plus tôt.

Dans cette société de plus en plus intense, nous vous proposons à choisir une façon de se former plus efficace : moins de temps et d'argent dépensé. Pass4Test peut vous offrir une bonne solution avec une plus grande space à développer.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Nortel 920-159 peut vous assurer à réussir 100% le test Nortel 920-159. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Code d'Examen: 920-159
Nom d'Examen: Nortel (Ncss callpilot 2.x/3.0)
Questions et réponses: 140 Q&As

Si vous traviallez dur encore pour préparer le test de Nortel 920-159 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Nortel 920-159.

Avec l'aide du Pass4Test, vous allez passer le test de Certification Nortel 920-159 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Nortel 920-159, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.

920-159 Démo gratuit à télécharger: http://www.pass4test.fr/920-159.html

NO.1 .When provisioning the Embedded Local Area Network (ELAN) on a CS 1000 system for a
site with a CallPilot 3.0 system with 96 DSO channels, what number should you set the
maximum number of call registers for CSL input (CSQI in LD 17)?
A. 20
B. 96
C. 192
D. 255
Answer: C

Nortel   920-159 examen   certification 920-159   920-159 examen

NO.2 When installing a 40-channel 3.0 system using a 201i server and a Meridian 1 Option 11C
mini switch, how should you set the SCSI ID on the Tandberg SLR5 tape drive
(NTRH9038)?
A. Rotate the dial on the SCIS ID rotary switch unit the arrow points to 3.
B. Use the blade of a screwdriver to press either the plus (+) or minus (? Button the SCSI ID
switch to set the SCIS ID to 5.
C. Use the blade of a screwdriver to set DIP switches as follows.
1=ON, 2=off, 3=Off, 4=Off, 5=Off
D. The SCSI ID for the Tandberg SLR5 tape drive (NTRH9038) is set when you run the
Configuration Wizard after you install the CallPilot system.
Answer: B

certification Nortel   920-159   certification 920-159   certification 920-159   920-159

NO.3 Which three CallPilot features are supported by Business Communication Manager
(BCM) 3.0? (Choose three.)
A. ability to annotate faxes
B. ability to save voice messages
C. ability to reject passwords (such as 888888)
D. ability to set message sensitivity to urgent or Normal
Answer: A.B.D

NO.4 .XXXX .com has a CallPilot 3.0 configuration connected to a Meridian 1. the CallPilot
platform connect to the network loops in the IPE shelf through MGate cards. The MGate
cards plug into the Meridian 1 IPE shelf. Which three platform types connect using the
Mgate card? (Choose three.0?
A. 200i
B. 201i
C. 702t
D. 1001ro
E. 1002rp
Answer: A.B.C

NO.5 A site has a CallPilot 3.0 server. Which two administrative functions support the
web-based CallPilot Manager administrative application? (Choose two.)
A. Managing system configuration and backups
B. Creating application with Application Builder
C. Managing mailbox Users, groups, and permissions
D. Managing CallPilot Simple network Maintenance Protocol (SNMP) traps
Answer: A.C

NO.6 .Exhibit
Prior to installing a CallPilot 3.0 system, you review, the Configuration Wizard worksheet.
The customer has provided category 5 cable connections to their corporate LAN for the
Switch Ethernet connection, the CallPilot Server Customer LAN (CLAN) Ethernet
connection, and the CallPilot Server Embedded LAN (ELAN) Ethernet connection. The
network address information (shown in the exhibit) for the Switch IP address, the CallPilot
server ELAN IP address, and the CallPilot Server CLAN IP address integrate with the
customer's internal network. What action would you take?
A. Proceed with the installation using the category 5 cable connections, IP addresses and Subnet
mask provided by the customer.
B. Proceed with the installation but do not use the category 5 cable connections provided by the
customer for the Switch Ethernet connection and the CallPilot server ELAN Ethernet
connection. Use a separate category 5 cable that connects directly from the switch to the ELAN
network interface connector on the server.
C. Inform the customer that IP address beginning with 192.168 are private address and if used
the ELAN will not be able to be connected to the internet.
D. Inform the customer that the ELAN must be on a separate IP network isolated from the
CLAN. Recommend that they use a dedicated hub that can either be supplied by Nortel Network
or a third party for the ELAN and recommend different IP addresses for switch and the ELAN
NIC.
Answer: D

Nortel   certification 920-159   920-159 examen   certification 920-159   920-159

NO.7 You are installing a CallPilot 3.0 system with 32 Voice channels, 8 Fax channels, and 4
ASR (automated speech recognition) Cannels using a CallPilot 702t server and a Meridian
1 IP Enable (IE) Option 61C switch. How many NTRB18CA MGate cards must be
installed in the switch to support this configuration?
A. 1
B. 2
C. 3
D. 4
Answer: B

Nortel examen   920-159   920-159   920-159

NO.8 A site has a CallPilot server interworking with a Symposium server. Where are the
applications (announcement service, menus, etc.) stored to support Symposium to CallPilot
integration?
A. in a folder
B. in a mailbox
C. on the C drive
D. by a backup file
Answer: A

Nortel   certification 920-159   920-159   920-159

NO.9 When installing a 96-chabbel 3.0 system using a 1003rp server and a CS 1000 system, how
would you install the Nortel Network software feature key adapter?
A. The Nortel Networks software feature Key adapter is installed in its bracket on the
motherboard in the 102rp server.
B. The Nortel Networks software feature Key adapter is installed in the COM1 serial port
connector on the rear of the 1002rp server.
C. The Nortel Networks software feature Key adapter is installed in the COM1 serial port
connector on the rear of the 1002rp server.
D. The Nortel Networks software feature Key adapter is installed in the Parallel port connector
LPT1 on the rear of the 1002rp server.
Answer: D

certification Nortel   920-159 examen   920-159 examen

NO.10 .When installing a 40-channel CallPilot 3.0 system using a 201i server and a CS 1000
system, how do you connect the SCSI connection to the server?
A. The SCSI connection to the 201i server is made with the low profiles right-angle SCIS
connector on the SCIS connector on the 201i server faceplate.
B. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is made with the
CD-ROM drive SCSI cable NTRH1408 attached from the SCIS connector on the 201i server
faceplate to the SCSI adapter A0763912 on the CD-ROM drive
C. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is made via the
backplane connector in the Media Gateway or Media Gateway Expansion with the multi I/O
cable (NTRH0912) to the next drive in the SCIS chain.
D. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is madewith the
intermediate SCIS cable NTRH1408 that connect from the SCIS connector on the 201i server
faceplate to the I/O panel connector and the NTRH410 SCSIcable that connect from the I/O
panel connector to the next device in the SCSI chain.
Answer: A

Nortel examen   certification 920-159   920-159 examen

Au 21er siècle, il manque encore grand nombreux de gens qualifié de IT. Le test Certificat IT est une bonne façon à examiner les hommes de talent. Ce n'est pas un test facile à réussir. Un bon choix de formation est une assurance pour le succès de test. Le test simulation est bien proche que test réel. Vous pouvez réussir 100%, bien que ce soit la première à participer le test.

没有评论:

发表评论