Certification Motorola Solutions de téléchargement gratuit pratique d'examen MSC-111 MSC-431 MSC-131, questions et réponses

Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Motorola Solutions MSC-111 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Motorola Solutions MSC-431 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Motorola Solutions MSC-131 très tôt. Pass4Test peut vous permettre à réussir 100% le test Motorola Solutions MSC-131, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

Vous pouvez tout d'abord télécharger le démo Motorola Solutions MSC-111 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Code d'Examen: MSC-111
Nom d'Examen: Motorola Solutions (Design Point (PTP and PMP) Solutions)
Questions et réponses: 114 Q&As

Code d'Examen: MSC-431
Nom d'Examen: Motorola Solutions (Lean Six Sigma Black Belt)
Questions et réponses: 100 Q&As

Code d'Examen: MSC-131
Nom d'Examen: Motorola Solutions (Design and Deploy AirDefense Solutions)
Questions et réponses: 103 Q&As

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

MSC-111 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-111.html

NO.1 Microwave Point to Point systems can be susceptible to Multi-path cancellation. Which technology can
help mitigate Multi-Path?
A. IEEE 802.3AF
B. OFDM (Orthogonal Frequency Division Duplex)
C. Transmit time diversity
D. RF port replication
Answer: B

certification Motorola Solutions   MSC-111   certification MSC-111   MSC-111 examen

NO.2 What is the common term used to describe the process of limiting which VLAN IDs can traverse a
particular VLAN trunk port.?
A. VLAN Pruning
B. MVRP (Multiple VLAN Registration Protocol)
C. VTP (VLAN Trunk Protocol)
D. VLAN Sectioning
E. VLAN Negotiation
Answer: A

certification Motorola Solutions   certification MSC-111   MSC-111   certification MSC-111

NO.3 The main function of an antenna is to:
A. add power to a signal,
B. decode radio signals into data traffic.
C. direct radio energy in a desired direction.
D. protect transmitters from lightning.
Answer: C

Motorola Solutions   certification MSC-111   MSC-111 examen   MSC-111 examen

NO.4 Spatial Diversity is an antenna configuration that can be used to help point to point links: A. over long
distances of water where reflections are causing cancellation,
B. when interference from multiple directions is an issue.
C. when wind loading constraints will not allow a dual polarized antenna.
D. if site access is restricted because of security issues.
Answer: A

Motorola Solutions   certification MSC-111   certification MSC-111   MSC-111 examen   certification MSC-111

NO.5 Dynamic addressing simplifies network administration because the software keeps track of IP
addresses rather than requiring an administrator to manage the task. This means that a new device can
be added to a network without the hassle of manually assigning it a unique IP address.
Which of the following devices would typically use DHCP to get an address?
A. Switches/Hubs
B. Client/End Devices
C. Routers
D. Bridges
Answer: B

Motorola Solutions examen   MSC-111   MSC-111 examen   certification MSC-111

NO.6 High Performance parabolic directional antennas are used in FTP network designs and provide:
A. side lobe suppression and interference mitigation.
B. broadest (or widest) beamwidth
C. superior wind loading for storm prone areas.
D. consistent spectrum analysis.
Answer: A

certification Motorola Solutions   MSC-111 examen   MSC-111 examen   MSC-111 examen   MSC-111 examen

NO.7 When installing a PMP Access Point antenna on a tower, you need to install it at the proper height.
Motorola recommended practice is to mount the antenna at least how many feet/meters below the top of
the tower to protect it from lightning?
A. 0 feet / meters
B. 2 feet/0.6 meters
C. 10 feet/3 meters
D. 25 feet / 8 meters
Answer: B

Motorola Solutions   MSC-111 examen   MSC-111   certification MSC-111

NO.8 During the early stages of the design process, the current and planned IP addressing scheme on the
project description template is used to check:
A. IP addressing conflicts with defaults.
B. Open Shortest Path First (OSPF) configuration
C. IP addressing requirements for core and edge routers.
D. network component capacity design
Answer: A

Motorola Solutions examen   MSC-111 examen   certification MSC-111   MSC-111

Guide de formation plus récente de Motorola Solutions MSC-111

Pour réussir le test Motorola Solutions MSC-111 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Motorola Solutions MSC-111. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Motorola Solutions MSC-111 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Motorola Solutions MSC-111 comme votre guide d'étude.

Vous aurez une assurance 100% à réussir le test Motorola Solutions MSC-111 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Code d'Examen: MSC-111
Nom d'Examen: Motorola Solutions (Design Point (PTP and PMP) Solutions)
Questions et réponses: 114 Q&As

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Motorola Solutions MSC-111 à se preuver. Mais le taux du succès et bien bas. Participer le test Motorola Solutions MSC-111 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Vous allez choisir Pass4Test après essayer une partie de Q&A Motorola Solutions MSC-111 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Motorola Solutions MSC-111.

MSC-111 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-111.html

NO.1 High Performance parabolic directional antennas are used in FTP network designs and provide:
A. side lobe suppression and interference mitigation.
B. broadest (or widest) beamwidth
C. superior wind loading for storm prone areas.
D. consistent spectrum analysis.
Answer: A

Motorola Solutions examen   MSC-111 examen   certification MSC-111

NO.2 Microwave Point to Point systems can be susceptible to Multi-path cancellation. Which technology can
help mitigate Multi-Path?
A. IEEE 802.3AF
B. OFDM (Orthogonal Frequency Division Duplex)
C. Transmit time diversity
D. RF port replication
Answer: B

Motorola Solutions examen   MSC-111 examen   MSC-111 examen

NO.3 As a general design guideline, the signal strength required to meet a specific target modulation must
be exceeded in order to guarantee reliable communications. What is this excess signal strength called?
A. Receive Strength Ratio
B. Fade Margin
C. Signal Strength Ratio
D. Diversity Margin
Answer: B

certification Motorola Solutions   MSC-111   certification MSC-111

NO.4 What protocol does a Dynamic Domain name server work in conjunction with to dynamically create 'A'
address records?
A. Internet Control Message Protocol (ICMP)
B. Transmission Control Protocol/Internet Protocol (TCP/IP)
C. LACP (Link Aggregation Control Protocol)
D. Dynamic Host Configuration Protocol (DHCP)
Answer: D

Motorola Solutions examen   MSC-111 examen   MSC-111 examen   certification MSC-111   certification MSC-111

NO.5 Thermal Ducting is a phenomenon often seen over great distances of water and flat hot terrain. It is the
layering of different density air in the atmosphere and can cause significant signal fading. One possible
solution to Thermal Ducting is to:
A. use two physically separated single polarized antennas (also known as Space Diversity)
B. deploy a single polarization microwave system.
C. increase frequency to increase free space attenuation.
D. deploy a Dual Polarity antenna at both ends of a link.
Answer: A

Motorola Solutions examen   MSC-111 examen   MSC-111 examen   MSC-111 examen

NO.6 The main function of an antenna is to:
A. add power to a signal,
B. decode radio signals into data traffic.
C. direct radio energy in a desired direction.
D. protect transmitters from lightning.
Answer: C

certification Motorola Solutions   certification MSC-111   MSC-111 examen   MSC-111 examen

NO.7 Refraction of a radio wave could be caused by:
A. lack of transmit power.
B. sun spots.
C. change in air density.
D. antenna height.
Answer: C

Motorola Solutions   MSC-111   MSC-111

NO.8 During the early stages of the design process, the current and planned IP addressing scheme on the
project description template is used to check:
A. IP addressing conflicts with defaults.
B. Open Shortest Path First (OSPF) configuration
C. IP addressing requirements for core and edge routers.
D. network component capacity design
Answer: A

Motorola Solutions examen   MSC-111   certification MSC-111   MSC-111

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

Les meilleures Motorola Solutions MSC-431 examen pratique questions et réponses

Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Motorola Solutions MSC-431 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Vous pouvez tout d'abord télécharger le démo Motorola Solutions MSC-431 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Code d'Examen: MSC-431
Nom d'Examen: Motorola Solutions (Lean Six Sigma Black Belt)
Questions et réponses: 100 Q&As

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Motorola Solutions MSC-431 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Motorola Solutions MSC-431 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Motorola Solutions MSC-431.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Motorola Solutions MSC-431 peut vous assurer à réussir 100% le test Motorola Solutions MSC-431. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

MSC-431 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-431.html

NO.1 Electrical devices are evaluated as conforming or not conforming to specifications. The
appropriate data type is:
A. Nominal discrete data
B. Continuous data
C. Ordinal data
D. Variable data
Answer: A

Motorola Solutions   MSC-431   MSC-431 examen   MSC-431 examen

NO.2 What is the most powerful factor in achieving success in Six Sigma in an organization?
A. Strategic Integration
B. Business Process Framework
C. A consistent, disciplined team meeting schedule
D. Committed Leadership
Answer: D

certification Motorola Solutions   MSC-431   MSC-431 examen   MSC-431 examen   MSC-431 examen

NO.3 What is the purpose of performing a Stakeholder Analysis?
A. Analyze the strength of commitment needed for project stakeholders vs. where they are currently
B. Analyze the risk for the project
C. Analyze the completeness of charter for the project
D. Analyze the methodology chosen for the project
Answer: A

certification Motorola Solutions   MSC-431 examen   certification MSC-431   certification MSC-431
7. Which of the following terms refers to a trial implementation of the proposed design or
process change on a reduced scale?
A. Production Run
B. Pilot
C. Design of Experiments
D. Comparative Method
Answer: B

certification Motorola Solutions   MSC-431 examen   MSC-431 examen   certification MSC-431   MSC-431
8. What is the correct order of steps in an experiment (DOE)?
-Design the experiment & plan data collection -Run the experiment and collect data -State the
problem or objective -Analyze the results -Interpret the results"
A. 1,3,4,2,5
B. 3, 1, 2,4,5
C. 3,1,4,2,5
D. 3, 1, 2, 5,4
Answer: B

Motorola Solutions   certification MSC-431   MSC-431   MSC-431   MSC-431 examen

NO.4 After developing a Process map (listing steps and functions), the first step in developing an
FMEA is:
A. Brainstorming possible failure modes with team members
B. Assigning scores for SEVERITY , OCCURRENCE and DETECTION
C. Calculating RPN-Risk Priority Number
D. Prioritizing failure modes for action or resolution
Answer: A

certification Motorola Solutions   MSC-431 examen   certification MSC-431   certification MSC-431

NO.5 In a statistical analysis, the beta risk () is:
A. The probability of rejecting the null hypothesis when it is true
B. Always equal to 0.10
C. Driven by the cost of sampling
D. The probability of failing to reject the null hypothesis when it is false
Answer: D

certification Motorola Solutions   certification MSC-431   certification MSC-431   certification MSC-431

NO.6 For a multiple regression model, the R2 is the parameter that:
A. Represents the fraction of total variation explained by the model
B. Explains the strength of only one of the inputs in the model
C. Explains if the input factor causes the output response
D. Quantifies the slope of the line in the model
Answer: A

certification Motorola Solutions   MSC-431 examen   MSC-431 examen   certification MSC-431   MSC-431 examen

Le test de Certification Motorola Solutions MSC-431 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.

Certification Motorola Solutions de téléchargement gratuit pratique d'examen MSC-122, questions et réponses

Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Code d'Examen: MSC-122
Nom d'Examen: Motorola Solutions (Deploy WLAN Solutions)
Questions et réponses: 113 Q&As

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Motorola Solutions MSC-122, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Motorola Solutions MSC-122 est une bonne examination. Mais c'est difficile à passer le test Motorola Solutions MSC-122. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Motorola Solutions MSC-122 juste avec la Q&A de Motorola Solutions MSC-122 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

MSC-122 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-122.html

NO.1 Which of the following is the primary method of collision avoidance in an 802.11 CSMA/CA WLAN?
A. Backoff Timer
B. Carrier Sense
C. Contention Window
D. Enhanced Distributed Channel Access (EDCA)
E. Distributed Coordination Function Interframe Spaces (DIFS)
Answer: B

Motorola Solutions   MSC-122   MSC-122 examen   MSC-122 examen

NO.2 Which of the following APs does not support adaptive mode?
A. AP7131
B. AP6532
C. AP650
D. AP6521
Answer: A

Motorola Solutions examen   MSC-122   MSC-122

NO.3 During a recent throughput analysis test of your 802.11g network, you discovered that performance is
poor in comparison to previous baselines. You discover that this is the result of 802.11b stations becoming
associated with your access point. What option could you implement to eliminate 802.lib clients from
attaching to your network?
A. Implement protection mechanisms
B. Make 24 mbps a required data rate
C. Implement RTS/CTS at the access point
D. Change the channel used for the network
Answer: B

certification Motorola Solutions   MSC-122   certification MSC-122   MSC-122

NO.4 Which of the following statements is NOT considered to be a best practice with respect to the wired
backbone serving the WLAN.?
A. When performing manual configuration of a point-to-point Ethernet link, ensure that both the speed and
the duplex mode settings on the two ports match.
B. When creating a link between Ethernet 10/100BASE-T or 10/100/1000BASE-T ports, enable (or accept
the default of) auto-negotiation on both ports.
C. When creating a link between Gigabit Ethernet fiber ports, enable (or accept the default of)
auto-negotiation.
D. When creating a link between Gigabit Ethernet fiber ports, disable auto-negotiation on both ports.
Answer: D

certification Motorola Solutions   MSC-122   MSC-122 examen

NO.5 You have just conducted a throughput test using iPerf on a WLAN that shows a PHY signaling rate of 54
Mbps, however the average throughput rate shown in iPerf is only 23.5 Mbps. What is the most likely
explanation for this condition?
A. This throughput speed is considered nominal.
B. This throughput rate could indicate a mismatch between Wi-Fi confidentiality algorithms.
C. This throughput rate indicates excessive user activity.
D. This throughput rate indicates excessive out-of-band interference such as nearby cell phone towers.
Answer: A

Motorola Solutions   MSC-122   MSC-122

NO.6 You are performing a physical site survey of a new WiNG 5 WLAN deployment. Which of the following is
CORRECT?
A. The Signal to Noise Ratio (SNR) is a critical measurement that needs to be addressed.
B. It is acceptable that you use any RF infrastructure device (Access Point) to perform the site survey test.
C. Using default settings of a site survey application will provide an adequate site survey result.
D. Customer throughput requirements are the only criteria for which need to be surveyed.
Answer: B

certification Motorola Solutions   certification MSC-122   MSC-122   certification MSC-122   MSC-122 examen

NO.7 You are designing a WLAN that will support multiple BSS IDs. One of the characteristics you need to
take into consideration is that each BSS transmits a beacon every 100 ms. How many BSSs can be
enabled on the following Motorola access points under WiNG 5: AP7131, AP650, AP6532?
A. 2, one per radio
B. 1 per AP, it is shared between the radios to provide seamless roaming
C. 8, four per radio
D. 16, eight per radio
Answer: D

certification Motorola Solutions   MSC-122 examen   MSC-122

NO.8 You have configured a Motorola RFS controller using WiNG 5 and have attempted to adopt a group of
APs using L2 adoption but the adoption is not successful. You have confirmed the following:
-All of the APs have an Ethernet connection to the same LAN segment as the controller -Spanning Tree
Protocol (STP) has been disabled on the APs next hop switch port -Intermediate firewalls are not blocking
EtherType 0x8783
Given this scenario, which of the following is the most likely cause of the unsuccessful AP adoption?
A. DHCP option 192 has not been defined on the DHCP server
B. A local VLAN has been configured on both the controller and the APs
C. The APs GE ports have been configured for an S02.1q-tagged native VLAN
D. The APs GE ports have been configured for an 802.1q-untagged native VLAN
Answer: C

Motorola Solutions examen   MSC-122 examen   MSC-122 examen   MSC-122 examen

NO.9 Which of the following statements regarding the configuration of Motorola RFS controllers is TRUE?
A. ADSP can be used to push CLI profiles to APs and controllers.
B. LANPlanner can be used to push CLI profiles to APs and controllers.
C. RFMS can be used to perform predictive site surveys using an RFS controller
D. WiNG 5 can be used to perform manual site surveys using an RFs controller
E. CLI can be used to perform both manual and predictive site surveys using an RFS controller.
Answer: A

certification Motorola Solutions   MSC-122 examen   MSC-122 examen   MSC-122 examen

NO.10 You are deploying a new WLAN within the WiNG 5 architecture. Which of the following is the only
UNSUPPORTED Motorola access point/port?
A. AP-300
B. AP-650
C. AP-5131
D. AP-7131
Answer: C

Motorola Solutions   MSC-122 examen   MSC-122 examen   certification MSC-122   MSC-122   MSC-122

NO.11 Your customer has requested that you configure unique VLANs for voice, normal user data with
802.1X security, guest access, and management traffic. Which of the following VLAN modes can support
this request?
A. Native Mode
B. Access Mode
C. Trunk Mode
D. Aggregation Mode
E. Encapsulation Mode
Answer: C

Motorola Solutions examen   MSC-122 examen   MSC-122   MSC-122   MSC-122 examen

NO.12 You are deploying a new system and are creating the RF Domain(s). Which of the following options
would you use to group the APs into the same domain?
A. By VLAN, where all APs are on the same subnet.
B. By site, which can be a location where the group of installed APs can hear each other's beacons.
C. By name, so they can be easily sorted in the tree view of the controller.
D. By deployment phase, so configurations can be accidentally pushed to newly installed APs.
Answer: A

certification Motorola Solutions   MSC-122 examen   MSC-122   MSC-122 examen   certification MSC-122   MSC-122

NO.13 Your customer has requested that during the upcoming 802.llg to 802.11n upgrade deployment you
enable 40 MHz channels on 1, 6, and 11 of the 2.4 GHz ISM band. You respond by saying that there is not
enough spectrum to allow 40 MHz channels centered on 1, 6, and 11. How wide are standard 802.11g
(OFDM) channels?
A. 20 MHz
B. 83.5 MHz
C. 5 MHz
D. 11 MHz
E. 22 MHz
Answer: A

Motorola Solutions   MSC-122 examen   MSC-122   MSC-122

NO.14 If a Motorola access point induces a 50 mW RF signal onto a 3 dBi antenna, what will be the resulting
EIRP of the transmitted signal?
A. 0 dBm
B. 3 dBm
C. 20 dBm
D. 50 mW
E. 50 dBm
Answer: C

certification Motorola Solutions   MSC-122   MSC-122   certification MSC-122   certification MSC-122

NO.15 You have an access point that requires PoE connected to a switch with a 150 meter 10 BASE-T CAT 5
cable. During testing numerous problems with both data transmission and intermittent power occurs.
Which of the following is most likely the cause?
A. The cable should be CAT 6
B. There is a duplex mismatch
C. The cable should be 100 BASE-T
D. The cable is too long
Answer: D

Motorola Solutions   MSC-122 examen   certification MSC-122   MSC-122

Pass4Test est un seul site de provider le guide d'étude Motorola Solutions MSC-122 de qualité. Peut-être que vous voyiez aussi les Q&A Motorola Solutions MSC-122 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Le plus récent matériel de formation Motorola Solutions MSC-121

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Motorola Solutions MSC-121. Votre argent sera tout rendu si vous échouez le test.

Pour réussir le test Motorola Solutions MSC-121 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Motorola Solutions MSC-121. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Motorola Solutions MSC-121 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Motorola Solutions MSC-121 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Motorola Solutions MSC-121 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Motorola Solutions MSC-121 plus facilement avec la Q&A de Pass4Test.

Code d'Examen: MSC-121
Nom d'Examen: Motorola Solutions (Design WLan Solutions)
Questions et réponses: 112 Q&As

Obtenez la Q&A de test Motorola Solutions MSC-121 de Pass4Test plus tôt, vous pouvez réussir le test Certification Motorola Solutions MSC-121 plus tôt.

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Motorola Solutions MSC-121 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Motorola Solutions MSC-121 réel est lancée. C'est possible à réussir 100% avec le produit de Motorola Solutions MSC-121. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

L'importance de la position de Certificat Motorola Solutions MSC-121 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Motorola Solutions MSC-121 par votre première fois.

MSC-121 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-121.html

NO.1 You are designing a new 802.11 installation that will be built on an IEEE 802.3 10/100/1000
BaseT-backbone infrastructure. All IEEE 802.11n access points and VoIP phones will be IEEE
802.3 Power over Ethernet (PoE) powered devices. The 802.11n access points will utilize dual band 3X3
MIMO and require 802.3at PoE. Which is a true statement regarding a WLAN deployment of this nature?
A. This installation can only use endpoint Power Sourcing Equipment (PSE) devices.
B. Only IEEE 802.3af PoE devices can operate on a Gigabit network infrastructure.
C. VoIP phones and access points cannot be located on the same access layer PoE switches.
D. An accurate power sourcing equipment (PSE) power budget must be performed.
Answer: D

Motorola Solutions   MSC-121 examen   certification MSC-121   MSC-121   MSC-121 examen

NO.2 You have been assigned to design a new IEEE wireless LAN that will require six access points for both
coverage and capacity. Based on expected client device usage, it has been determined the
2.4 GHz ISM band will be the most appropriate for this deployment. Without taking any specific local
regulatory domain into consideration, how many channels are available for selection in the
2.4 GHz ISM band?
A. 3
B. 6
C. 11
D. 14
E. 23
Answer: D

Motorola Solutions   certification MSC-121   MSC-121   MSC-121 examen

NO.3 In radio frequency transmission the term Modulation Coding Scheme (MCS) is defined by which of the
following?
A. The combination of digital modulation method and a forward error correction mechanism.
B. A set of AES/CCMP cipher modes which assure integrity of an OFDM transmission.
C. The use of an encryption algorithm to securely code a modulated signal before transmission.
D. A multiplexing technique that uses orthogonal codes in place of X.509 digital certificates for message
validation.
Answer: A

certification Motorola Solutions   MSC-121   MSC-121   MSC-121

NO.4 You are a computer network consultant at a small medical office and responsible for the design and
deployment of the IEEE 802.11b/g WLAN. Some of the users of the WLAN are complaining about the
performance of the network. You use a layer 2 WLAN analyzer to view the frames traversing the wireless
medium to see if you can determine the problem. After careful examination of the data recorded you
notice a significant amount of CTS-to-Self frames. What is a potential reason for the high number of these
frame types?
A. The access points are in OFDM only mode
B. The access points support Quality of Service
C. The access points are in HR/DSSS only mode
D. The access points are in ERP protection mode
Answer: D

Motorola Solutions   MSC-121 examen   MSC-121   MSC-121 examen   MSC-121   certification MSC-121

NO.5 Network Layer TCP/IP packets that are prepared to be sent across the 802.11 wireless medium are
commonly known as which of the following?
A. MAC service data unit
B. MAC protocol data unit
C. LLC sub-layer data unit
D. MAC service switch unit
E. PHY layer service data unit
Answer: A

Motorola Solutions examen   MSC-121   MSC-121   MSC-121   MSC-121

NO.6 XYZ Company is deploying a companywide Motorola Solutions wireless infrastructure. The following
list is a breakdown of XYZ Company facilities with the number of access points required for each location:
-Corporate HQ: 36 AP -Distribution Centers (3): 48 AP each -Warehouses (5): 34, 64, 28, 12, 20 AP
respectively -Satellite offices (25): 1-2 AP each. -Stores (1100): 3-4 AP each.
XYZ is looking for the most cost effective solution, while still being able to manage and configure the
system centrally. Which of the following would you recommend?
A. AP7131s at each location.
B. NX9000 at Corporate HQ and AP7131's at all locations.
C. NX9000 at Corporate HQ, RFS6000 and AP650 at locations with more than 24 AP's, AP6532 at
locations with less than 24 AP's.
D. 4 RFS7000 at Corporate HQ, RFS6000 and AP650 at locations with 24 or more AP's, AP6532 at
locations with less than 24 AP's.
E. NX9000 at Corporate HQ, RFS7000 and AP650 at locations with more than 24 AP's, AP7131 at
locations with up to 24 AP's.
Answer: C

Motorola Solutions   MSC-121   certification MSC-121

NO.7 You are responsible for designing an 802.11n controller based wireless LAN for your organization
using independent access point technology, The Information Technology team has decided the wireless
LAN controllers should be installed on the core layer at the headquarters office location configured for
centralized forwarding. Which statements are true concerns with respect to this type of installation (select
TWO)?
A. S02.11n independent access points require the controller be installed at the network access layer only.
B. The WLAN controller at the core layer may be a bottleneck and limit scalability if not properly planned.
C. Network core layer deployments should always use 10 Gigabit (or faster) Ethernet components.
D. With centralized forwarding enabled all wireless traffic is tunneled to the WLAN controller that is
connected to the network core layer.
Answer: B,D

Motorola Solutions   MSC-121   MSC-121

NO.8 Which of the following must occur prior to a WLAN client device being assigned a TCP/IP address
through DHCP?
A. Successful 802.11 roaming
B. Successful 802.11 association
C. Successful 802.11 authentication
D. Successful 802.11 probe response
Answer: B

Motorola Solutions examen   MSC-121 examen   MSC-121 examen   certification MSC-121

NO.9 Which of the following terms refers to the strength of an emitted RF signal measured at its strongest
point?
A. EIRP (Equivalent Isotropic Radiated Power)
B. 1FZ (First Fresnel Zone)
C. Azimuth
D. dBi
E. IR (Intentional Radiator)
Answer: A

Motorola Solutions examen   certification MSC-121   MSC-121

NO.10 The IEEE 802.lln amendment to the standard addresses several PHY layer enhancements. One of
these enhancements is "Channel Bonding" allowing for 40 MHz wide channels. Without taking any
specific local regulatory domain into consideration, what is the maximum number of non-overlapping 40
MHz wide channels that can exist in the 2.4 GHz ISM band.?
A. 1
B. 2
C. 3
D. 6
E. 11
F. 20
Answer: A

certification Motorola Solutions   MSC-121 examen   MSC-121 examen   MSC-121 examen   certification MSC-121   MSC-121 examen

NO.11 You are a network design engineer and are assigned to provide an enterprise S02.1X/EAP solution to
secure your company's IEEE 802.11n WLAN. What networking protocol/service that provides centralized
Authentication, Authorization, and Accounting (AAA) management for computers to connect and use
wireless network resources can be implemented?
A. Secure Shell (SSH)
B. Public Key Infrastructure (PKI)
C. Virtual Private Networking (VPN)
D. Wi-Fi Protected Access (WPA) Passphrase
E. Remote Authentication DialinUser Service (RADIUS)
Answer: E

Motorola Solutions   certification MSC-121   MSC-121   certification MSC-121

NO.12 Which of the following statements is CORRECT concerning the IEEE 802.11 Open Authentication
procedure?
A. Uses four way frame exchange
B. Is optional before additional authentication
C. May occur after the association
D. Must occur before additional authentication
Answer: D

Motorola Solutions   MSC-121   MSC-121   MSC-121 examen   MSC-121

NO.13 Which of the following duplexing methods is used by the radios in Motorola's WLAN products?
A. Half-duplex
B. Full-duplex
C. Simplex
D. Half-duplex Tx / Full-duplex Rx
E. Full-duplex Tx / Ha If-duplex Rx
Answer: A

Motorola Solutions   MSC-121 examen   MSC-121   MSC-121 examen   MSC-121

NO.14 Which of the following situations would force a wireless client to renew its IP address?
A. Roaming between two BSSIDs assigned to the same VLAN
B. Roaming between controllers supporting the same VLANs
C. Roaming between two BSSIDs assigned to different VLANs
D. All of the above would force a client to renew its IP address
Answer: C

certification Motorola Solutions   MSC-121   MSC-121   MSC-121 examen   certification MSC-121   certification MSC-121

NO.15 You are assigned the task of evaluating a wireless network. While using a layer 2 wireless LAN
analysis capture tool you notice support of a minimum rate of 6 Mbps. What IEEE 802.11 standard or
amendment to the standard operating in the U-NII band is in use on the company's WLAN (select TWO)?
A. 802.11
B. 802.11b
C. 802.11n
D. 802.11g
E. 802.11a
Answer: C,E

Motorola Solutions examen   certification MSC-121   MSC-121

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

Le dernier examen Motorola Solutions MSC-241 gratuit Télécharger

Le programme de formation Motorola Solutions MSC-241 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Finalement, la Q&A Motorola Solutions MSC-241 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Motorola Solutions MSC-241 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Motorola Solutions, vous aurez un meilleur salaire et une plus grande space à se développer.

Code d'Examen: MSC-241
Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Solutions EMEA)
Questions et réponses: 108 Q&As

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

Pass4Test vous promet de vous aider à passer le test Motorola Solutions MSC-241, vous pouvez télécharger maintenant les Q&As partielles de test Motorola Solutions MSC-241 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Motorola Solutions MSC-241 à se preuver. Mais le taux du succès et bien bas. Participer le test Motorola Solutions MSC-241 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Motorola Solutions MSC-241 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Motorola Solutions MSC-241. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Motorola Solutions MSC-241, vous aurez une meilleure préparation avec l'aide de Pass4Test.

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Motorola Solutions MSC-241 très tôt. Pass4Test peut vous permettre à réussir 100% le test Motorola Solutions MSC-241, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

MSC-241 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-241.html

NO.1 On which type of channel in an IP Site Connect system are Transmit Interrupt features
supported
in repeater firmware releases R01.08.00 and higher?
A. Wide Area Slots only
B. Local Area Slots only
C. Both Wide and Local Area slots
D. Noneoftheabove
Answer: D

Motorola Solutions   MSC-241   MSC-241 examen   MSC-241 examen

NO.2 You are looking to optimize battery life of radios that are close to the base station. Which is
the
most likely parameter for optimizing the battery life of a radio for a Capacity Plus system?
A. Beacon interval
B. Beacon duration
C. High power mode in Radio
D. Low power mode in Radio
Answer: D

Motorola Solutions examen   MSC-241   MSC-241

NO.3 What will Enhanced Channel Access improve?
A. The amount of GPS updates that can be sent on a data revert channel
B. The amount of time from when PTT is pressed until voice is sent
C. Call success rate
D. Call setup time
Answer: C

Motorola Solutions   certification MSC-241   MSC-241   MSC-241 examen   MSC-241   MSC-241

NO.4 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. On the 24th of May, there is a lighting strike at the site
and the building lost power, causing the three repeaters to revert to DC power. The design of the
site called for just the repeaters to be battery backed. However the next morning the customer
calls and reports that a number of talkgroups are getting busy tones (engaged), yet other groups
are seeing no busy tones (engaged) on the system. Which of the following statements BEST
describe the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The peers use DHCP and were not able to connect to the master and refresh their peer list and
went off the Capacity Plus network as their leases expired.
C. The switch was not on battery backup and there are no LAN connections on the Capacity Plus
system, each of the repeaters are now operating as three (3) independent Capacity Plus systems.
D. The peers use DHCP and were not able to connect to the master and refresh their peer list.
The dealer should have used static IP addresses throughout.
Answer: C

Motorola Solutions examen   MSC-241   certification MSC-241   MSC-241 examen   MSC-241

NO.5 Which of the following are TRUE statements about operating a MOTOTRBO repeater in an IP
Site
Connect configuration?
A. One of its logical channels can work in IP Site Connect mode (over wide area) and the other
logical channel can work in digital repeater mode (single site over local area).
B. Both logical channels can work in digital repeater mode (single site over local area).
C. Both logical channels can work in IP Site Connect mode (over wide area).
D. Only A and B are true (C is false).
E. Only A and C are true (B is false).
F. A, B, and C are true.
Answer: F

certification Motorola Solutions   MSC-241   MSC-241   MSC-241 examen   certification MSC-241

NO.6 What changes are required to the Master Repeater in an IP Site Connect system when a new
peer
is added to the system?
A. Both the IP address and port number of the new repeater must be configured into the Master
Repeater.
B. The address of the new peer must be configured into the Master Repeater.
C. The port of the new peer must be configured into the Master Repeater.
D. No changes are required to the Master Repeater.
Answer: D

Motorola Solutions examen   MSC-241   certification MSC-241   certification MSC-241   MSC-241   MSC-241 examen

NO.7 Which of the following antennas is BEST suited for providing coverage inside a tall building?
A. 4 element Yagi
B. Radiating coaxial cable
C. End-fed half-wave antenna
D. High gain collinear antenna
Answer: B

certification Motorola Solutions   MSC-241   MSC-241 examen

NO.8 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. The dealer needs to make a simple change in repeater
two (2) and utilize IP repeater programming (IRP) to access the repeater remotely. A couple of
days later the customer calls and complains about users getting system busy tones (engaged
tones).
The dealer attempts to connect an RDAC remotely to the system with no success. He has verified
he can communicate to the router at the site.
Which of the following statements BEST describes the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The master has gone down and the system is operating on just two (2) repeaters.
C. There is RF interference on the channel and the master repeater is unable to communicate to
the peers.
D. The peers are using DHCP and are not able to connect to the master and refresh their peer list.
The system is operating on just the master.
Answer: B

Motorola Solutions   certification MSC-241   MSC-241 examen   MSC-241

NO.9 A MOTOTRBO repeater is connected to a Zetron Model 35 Telephone Interconnect. If a
telephone
user dials the Telephone Interconnect number, they get a busy signal (engaged tone). If a radio
user dials any telephone number, they don’t hear the ringing tone, only silence. Upon visiting the
site, you find that when a radio user dials, the relay click can be heard from the Zetron Model 35.
Unplugging the RJ11 and dialing the Telephone Interconnect, still results in a busy signal
(engaged tone). With this information, what do you think could be wrong?
A. The Zetron Model 35 may be faulty.
B. The Zetron Model 35 has probably not been configured for the phone line Ringer Equivalence
Number (REN).
C. The RJ11 cable may have a short circuit or there is a short circuit somewhere between the site
and the exchange.
D. The repeater interface cable to the Zetron Model 35 is faulty.
Answer: C

certification Motorola Solutions   MSC-241   certification MSC-241

NO.10 Which of the following are TRUE statements about operating a MOTOTRBO repeater in a
Capacity Plus configuration?
A. One of its logical channels can work in trunked mode and the other logical channel can work in
data revert mode.
B. Both logical channels can work in trunked mode.
C. Both logical channels can work in data revert mode.
D. Only A & B are true (C is false)
E. Only B & C are true (A is false)
F. A, B, & C are true
Answer: F

Motorola Solutions examen   MSC-241   MSC-241 examen

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Motorola Solutions MSC-241 est une bonne examination. Mais c'est difficile à passer le test Motorola Solutions MSC-241. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

Le matériel de formation de l'examen de meilleur Motorola Solutions MSC-122

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Motorola Solutions MSC-122. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Motorola Solutions MSC-122. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

En quelques années, le test de certification de Motorola Solutions MSC-122 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Motorola Solutions MSC-122? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification MSC-122. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification MSC-122, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.

Si vous traviallez dur encore pour préparer le test de Motorola Solutions MSC-122 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Motorola Solutions MSC-122.

Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.

Code d'Examen: MSC-122
Nom d'Examen: Motorola Solutions (Deploy WLAN Solutions)
Questions et réponses: 113 Q&As

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Motorola Solutions MSC-122 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

MSC-122 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-122.html

NO.1 You have an access point that requires PoE connected to a switch with a 150 meter 10 BASE-T CAT 5
cable. During testing numerous problems with both data transmission and intermittent power occurs.
Which of the following is most likely the cause?
A. The cable should be CAT 6
B. There is a duplex mismatch
C. The cable should be 100 BASE-T
D. The cable is too long
Answer: D

Motorola Solutions   MSC-122 examen   MSC-122   MSC-122 examen   MSC-122 examen

NO.2 You are deploying a new WLAN within the WiNG 5 architecture. Which of the following is the only
UNSUPPORTED Motorola access point/port?
A. AP-300
B. AP-650
C. AP-5131
D. AP-7131
Answer: C

Motorola Solutions   MSC-122   MSC-122 examen   MSC-122   MSC-122

NO.3 You have configured a Motorola RFS controller using WiNG 5 and have attempted to adopt a group of
APs using L2 adoption but the adoption is not successful. You have confirmed the following:
-All of the APs have an Ethernet connection to the same LAN segment as the controller -Spanning Tree
Protocol (STP) has been disabled on the APs next hop switch port -Intermediate firewalls are not blocking
EtherType 0x8783
Given this scenario, which of the following is the most likely cause of the unsuccessful AP adoption?
A. DHCP option 192 has not been defined on the DHCP server
B. A local VLAN has been configured on both the controller and the APs
C. The APs GE ports have been configured for an S02.1q-tagged native VLAN
D. The APs GE ports have been configured for an 802.1q-untagged native VLAN
Answer: C

Motorola Solutions examen   MSC-122 examen   MSC-122

NO.4 You have just conducted a throughput test using iPerf on a WLAN that shows a PHY signaling rate of 54
Mbps, however the average throughput rate shown in iPerf is only 23.5 Mbps. What is the most likely
explanation for this condition?
A. This throughput speed is considered nominal.
B. This throughput rate could indicate a mismatch between Wi-Fi confidentiality algorithms.
C. This throughput rate indicates excessive user activity.
D. This throughput rate indicates excessive out-of-band interference such as nearby cell phone towers.
Answer: A

certification Motorola Solutions   MSC-122   certification MSC-122

NO.5 You are designing a WLAN that will support multiple BSS IDs. One of the characteristics you need to
take into consideration is that each BSS transmits a beacon every 100 ms. How many BSSs can be
enabled on the following Motorola access points under WiNG 5: AP7131, AP650, AP6532?
A. 2, one per radio
B. 1 per AP, it is shared between the radios to provide seamless roaming
C. 8, four per radio
D. 16, eight per radio
Answer: D

Motorola Solutions   MSC-122 examen   MSC-122 examen

NO.6 Your customer has requested that during the upcoming 802.llg to 802.11n upgrade deployment you
enable 40 MHz channels on 1, 6, and 11 of the 2.4 GHz ISM band. You respond by saying that there is not
enough spectrum to allow 40 MHz channels centered on 1, 6, and 11. How wide are standard 802.11g
(OFDM) channels?
A. 20 MHz
B. 83.5 MHz
C. 5 MHz
D. 11 MHz
E. 22 MHz
Answer: A

certification Motorola Solutions   MSC-122   MSC-122   certification MSC-122   MSC-122 examen

NO.7 You are deploying a new system and are creating the RF Domain(s). Which of the following options
would you use to group the APs into the same domain?
A. By VLAN, where all APs are on the same subnet.
B. By site, which can be a location where the group of installed APs can hear each other's beacons.
C. By name, so they can be easily sorted in the tree view of the controller.
D. By deployment phase, so configurations can be accidentally pushed to newly installed APs.
Answer: A

Motorola Solutions examen   MSC-122   MSC-122 examen   certification MSC-122   MSC-122

NO.8 If a Motorola access point induces a 50 mW RF signal onto a 3 dBi antenna, what will be the resulting
EIRP of the transmitted signal?
A. 0 dBm
B. 3 dBm
C. 20 dBm
D. 50 mW
E. 50 dBm
Answer: C

Motorola Solutions   certification MSC-122   MSC-122   MSC-122   MSC-122

NO.9 During a recent throughput analysis test of your 802.11g network, you discovered that performance is
poor in comparison to previous baselines. You discover that this is the result of 802.11b stations becoming
associated with your access point. What option could you implement to eliminate 802.lib clients from
attaching to your network?
A. Implement protection mechanisms
B. Make 24 mbps a required data rate
C. Implement RTS/CTS at the access point
D. Change the channel used for the network
Answer: B

Motorola Solutions   MSC-122   MSC-122   MSC-122   certification MSC-122

NO.10 Which of the following APs does not support adaptive mode?
A. AP7131
B. AP6532
C. AP650
D. AP6521
Answer: A

certification Motorola Solutions   certification MSC-122   MSC-122

NO.11 Which of the following statements is NOT considered to be a best practice with respect to the wired
backbone serving the WLAN.?
A. When performing manual configuration of a point-to-point Ethernet link, ensure that both the speed and
the duplex mode settings on the two ports match.
B. When creating a link between Ethernet 10/100BASE-T or 10/100/1000BASE-T ports, enable (or accept
the default of) auto-negotiation on both ports.
C. When creating a link between Gigabit Ethernet fiber ports, enable (or accept the default of)
auto-negotiation.
D. When creating a link between Gigabit Ethernet fiber ports, disable auto-negotiation on both ports.
Answer: D

Motorola Solutions   MSC-122 examen   MSC-122   certification MSC-122   certification MSC-122

NO.12 Which of the following is the primary method of collision avoidance in an 802.11 CSMA/CA WLAN?
A. Backoff Timer
B. Carrier Sense
C. Contention Window
D. Enhanced Distributed Channel Access (EDCA)
E. Distributed Coordination Function Interframe Spaces (DIFS)
Answer: B

certification Motorola Solutions   certification MSC-122   MSC-122   certification MSC-122   MSC-122

NO.13 You are performing a physical site survey of a new WiNG 5 WLAN deployment. Which of the following is
CORRECT?
A. The Signal to Noise Ratio (SNR) is a critical measurement that needs to be addressed.
B. It is acceptable that you use any RF infrastructure device (Access Point) to perform the site survey test.
C. Using default settings of a site survey application will provide an adequate site survey result.
D. Customer throughput requirements are the only criteria for which need to be surveyed.
Answer: B

certification Motorola Solutions   MSC-122   certification MSC-122   MSC-122 examen   MSC-122   MSC-122

NO.14 Which of the following statements regarding the configuration of Motorola RFS controllers is TRUE?
A. ADSP can be used to push CLI profiles to APs and controllers.
B. LANPlanner can be used to push CLI profiles to APs and controllers.
C. RFMS can be used to perform predictive site surveys using an RFS controller
D. WiNG 5 can be used to perform manual site surveys using an RFs controller
E. CLI can be used to perform both manual and predictive site surveys using an RFS controller.
Answer: A

Motorola Solutions   MSC-122   certification MSC-122   MSC-122 examen

NO.15 Your customer has requested that you configure unique VLANs for voice, normal user data with
802.1X security, guest access, and management traffic. Which of the following VLAN modes can support
this request?
A. Native Mode
B. Access Mode
C. Trunk Mode
D. Aggregation Mode
E. Encapsulation Mode
Answer: C

Motorola Solutions   MSC-122   MSC-122   MSC-122

Vous n'avez besoin que de faire les exercices à propos du test Motorola Solutions MSC-122 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

Pass4Test offre de Motorola Solutions MSC-235 matériaux d'essai

Dans cette Industrie IT intense, le succès de test Motorola Solutions MSC-235 peut augmenter le salaire. Les gens d'obtenir le Certificat Motorola Solutions MSC-235 peuvent gagner beaucoup plus que les gens sans Certificat Motorola Solutions MSC-235. Le problème est comment on peut réussir le test plus facile?

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

Code d'Examen: MSC-235
Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Connect Plus Solutions BETA)
Questions et réponses: 130 Q&As

Vous allez choisir Pass4Test après essayer une partie de Q&A Motorola Solutions MSC-235 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Motorola Solutions MSC-235.

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification Motorola Solutions MSC-235 via son guide d'étude. Est-ce que vous vous souciez de test Certification Motorola Solutions MSC-235? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

MSC-235 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-235.html

NO.1 You are using the Network Manager to connect to a multisite system. Where can you view the
current state of connections to other sites in this multisite system?
A. Event Log Viewer
B. RealTime Display
C. Site Status Window
D. MultiSite Configuration Window
Answer: C

Motorola Solutions examen   MSC-235 examen   MSC-235 examen   MSC-235 examen   MSC-235 examen   certification MSC-235

NO.2 Your customer is a rail operator whose system covers approximately 125 kilometers (77 miles)
of
track. Trains travel rapidly, and the operator is using a location tracking application to update their
displayed location as frequently as possible. Location updates are critical, even if this means
putting voice calls into the busy queue. What can you do to ensure this behavior?
A. Make sure that RSSI settings are set to -ll3dBm or less for “RSSI Preferred” in the mobiles in
the trains. This will allow the proper sensitivity to make frequent location updates possible. Give
individual SU records a lower priority than any talkgroup priority.
B. Enhanced GPS must be enabled in the Repeaters and Subscribers. Give individual SU records
a higher priority than any talkgroup priority.
C. Call Sessions Configuration in the Network Manager should be set to 29 for the “Number of
Outbound Data Sessions Allowed” field and somewhat less for the Number of Voice/Inbound Data
sessions field. Give individual SU records a higher priority than any talkgroup priority.
D. Location updates should be optimized by enabling Advanced GPS with GPS Data Revert
channels.
Answer: C

Motorola Solutions examen   MSC-235 examen   certification MSC-235   MSC-235

NO.3 If there is a failure or reboot of a site controller, which of the following must you consider
regarding
Over The Air (OTA) file transfers (select TWO)?
A. Any transfers in progress at the time of the failure may have to be repeated.
B. The controller will have to be re-entitled for OTA operation after it is back online.
C. If the site controller recovers on a different Control Channel, transfers may have to be
reconfigured.
D. Any pending transfers on that controller will be lost and must be re-queued.
Answer: A,D

certification Motorola Solutions   MSC-235   certification MSC-235

NO.4 Your customer operates a 4-site Connect Plus network. Two sites are adjacent to each other,
with
overlapping coverage. The other two sites respectively service two manufacturing plants that are
approximately 900 kilometers (559 miles) apart. There are approximately 30 talkgroups in the
network and 300 subscribers. When creating the Option Board codeplug for this customer’s
portable radios, which of the following is the best strategy to ensure smooth, logical operation?
A. Create a separate zone for each of the 4 sites to contain all the necessary contact and RSSI
settings.
B. Create a single Connect Plus zone that will address all of their necessary RSSI settings and
contact lists.
C. Create 2 Connect Plus zones to contain the different contacts and RSSI settings necessary
with this type of topology.
D. Create 3 separate Connect Plus zones to contain the different contacts and RSSI settings
necessary with this type of topology.
Answer: D

Motorola Solutions examen   MSC-235   MSC-235   certification MSC-235

NO.5 A Request for Proposal (RFP) for a single-site, operations-critical customer requires you to
respond to the following requirement: “...if the RF site equipment includes network switches,
describe the system behavior in the event of a site LAN switch failure.” Which of the following is
the BEST response to this requirement?
A. Redundant site networking equipment may be specified and configured so as to negate the
impact of a single site LAN switch failure. If redundant networking equipment is not installed,the
failure of a site LAN will not affect calls in-progress, but will make it impossible for subscribers to
register at the site.
B. If the single site LAN switch fails, the site master repeater will begin broadcasting failsoft
messages. All subscribers will revert to failsoft operation. The users may select any site repeater
on which to communicate conventionally.
C. Redundant site networking equipment may be specified and configured so as to negate the
impact of a single site LAN switch failure. If redundant networking equipment is not installed, the
failure of a site LAN switch will cause all calls to drop and the subscribers will attempt to roam to
an operational site.
D. In the case of a single-site system, Connect Plus does not utilize site LAN switches.
Answer: C

Motorola Solutions examen   MSC-235 examen   MSC-235   MSC-235 examen   MSC-235   certification MSC-235

NO.6 You are designing a 3 site Connect Plus system with 12 repeaters per site, no site controller
redundancy, and 3 control channel-capable repeaters at each site. The average number of
subscribers active at a site may approach 300 at any given time of the day. If this customer
experiences a site controller failure, what symptoms and subscriber behavior would you expect
immediately after the failure occurs?
A. All calls in progress at the site will drop. Subscribers will automatically fall back to digital
conventional, allowing users to utilize any of the site’s repeaters.
B. All calls in progress at the site will drop. All subscribers will attempt to roam to one of the other
sites.
C. Calls in progress will remain until one of the other control-channel capable repeaters assumes
the site controller’s role and then they will drop and register on the new controller.
D. Calls in progress will stay up until they complete normally. Subscribers on the control channel
will attempt to roam to one of the other sites.
Answer: B

Motorola Solutions   MSC-235   MSC-235 examen   MSC-235   certification MSC-235

Le test Motorola Solutions MSC-235 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test Motorola Solutions MSC-235. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.

Motorola Solutions MSC-241 examen pratique questions et réponses

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Motorola Solutions MSC-241. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Pass4Test possède un l'outil de formation particulier à propos de test Motorola Solutions MSC-241. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Motorola Solutions MSC-241 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.

Code d'Examen: MSC-241
Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Solutions EMEA)
Questions et réponses: 108 Q&As

Pour vous laisser savoir mieux que la Q&A Motorola Solutions MSC-241 produit par Pass4Test est persuadante, le démo de Q&A Motorola Solutions MSC-241 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Motorola Solutions MSC-241 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Motorola Solutions MSC-241. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Motorola Solutions MSC-241. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

Après une longue attente, les documentations de test Motorola Solutions MSC-241 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Motorola Solutions MSC-241 à la première fois.

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Motorola Solutions MSC-241 dans Pass4Test pour se former avant le test Motorola Solutions MSC-241.

MSC-241 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-241.html

NO.1 On which type of channel in an IP Site Connect system are Transmit Interrupt features
supported
in repeater firmware releases R01.08.00 and higher?
A. Wide Area Slots only
B. Local Area Slots only
C. Both Wide and Local Area slots
D. Noneoftheabove
Answer: D

certification Motorola Solutions   MSC-241   MSC-241   MSC-241 examen   MSC-241

NO.2 You are looking to optimize battery life of radios that are close to the base station. Which is
the
most likely parameter for optimizing the battery life of a radio for a Capacity Plus system?
A. Beacon interval
B. Beacon duration
C. High power mode in Radio
D. Low power mode in Radio
Answer: D

Motorola Solutions   MSC-241   MSC-241   MSC-241 examen

NO.3 Which of the following antennas is BEST suited for providing coverage inside a tall building?
A. 4 element Yagi
B. Radiating coaxial cable
C. End-fed half-wave antenna
D. High gain collinear antenna
Answer: B

Motorola Solutions examen   certification MSC-241   MSC-241   MSC-241   MSC-241   MSC-241

NO.4 Which of the following are TRUE statements about operating a MOTOTRBO repeater in a
Capacity Plus configuration?
A. One of its logical channels can work in trunked mode and the other logical channel can work in
data revert mode.
B. Both logical channels can work in trunked mode.
C. Both logical channels can work in data revert mode.
D. Only A & B are true (C is false)
E. Only B & C are true (A is false)
F. A, B, & C are true
Answer: F

certification Motorola Solutions   MSC-241   certification MSC-241

NO.5 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. On the 24th of May, there is a lighting strike at the site
and the building lost power, causing the three repeaters to revert to DC power. The design of the
site called for just the repeaters to be battery backed. However the next morning the customer
calls and reports that a number of talkgroups are getting busy tones (engaged), yet other groups
are seeing no busy tones (engaged) on the system. Which of the following statements BEST
describe the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The peers use DHCP and were not able to connect to the master and refresh their peer list and
went off the Capacity Plus network as their leases expired.
C. The switch was not on battery backup and there are no LAN connections on the Capacity Plus
system, each of the repeaters are now operating as three (3) independent Capacity Plus systems.
D. The peers use DHCP and were not able to connect to the master and refresh their peer list.
The dealer should have used static IP addresses throughout.
Answer: C

Motorola Solutions examen   MSC-241   MSC-241

NO.6 A MOTOTRBO repeater is connected to a Zetron Model 35 Telephone Interconnect. If a
telephone
user dials the Telephone Interconnect number, they get a busy signal (engaged tone). If a radio
user dials any telephone number, they don’t hear the ringing tone, only silence. Upon visiting the
site, you find that when a radio user dials, the relay click can be heard from the Zetron Model 35.
Unplugging the RJ11 and dialing the Telephone Interconnect, still results in a busy signal
(engaged tone). With this information, what do you think could be wrong?
A. The Zetron Model 35 may be faulty.
B. The Zetron Model 35 has probably not been configured for the phone line Ringer Equivalence
Number (REN).
C. The RJ11 cable may have a short circuit or there is a short circuit somewhere between the site
and the exchange.
D. The repeater interface cable to the Zetron Model 35 is faulty.
Answer: C

certification Motorola Solutions   MSC-241   certification MSC-241   certification MSC-241   certification MSC-241

NO.7 What changes are required to the Master Repeater in an IP Site Connect system when a new
peer
is added to the system?
A. Both the IP address and port number of the new repeater must be configured into the Master
Repeater.
B. The address of the new peer must be configured into the Master Repeater.
C. The port of the new peer must be configured into the Master Repeater.
D. No changes are required to the Master Repeater.
Answer: D

certification Motorola Solutions   MSC-241   certification MSC-241   MSC-241

NO.8 What will Enhanced Channel Access improve?
A. The amount of GPS updates that can be sent on a data revert channel
B. The amount of time from when PTT is pressed until voice is sent
C. Call success rate
D. Call setup time
Answer: C

Motorola Solutions   MSC-241   MSC-241   MSC-241 examen

NO.9 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. The dealer needs to make a simple change in repeater
two (2) and utilize IP repeater programming (IRP) to access the repeater remotely. A couple of
days later the customer calls and complains about users getting system busy tones (engaged
tones).
The dealer attempts to connect an RDAC remotely to the system with no success. He has verified
he can communicate to the router at the site.
Which of the following statements BEST describes the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The master has gone down and the system is operating on just two (2) repeaters.
C. There is RF interference on the channel and the master repeater is unable to communicate to
the peers.
D. The peers are using DHCP and are not able to connect to the master and refresh their peer list.
The system is operating on just the master.
Answer: B

certification Motorola Solutions   MSC-241 examen   MSC-241 examen   certification MSC-241

NO.10 Which of the following are TRUE statements about operating a MOTOTRBO repeater in an IP
Site
Connect configuration?
A. One of its logical channels can work in IP Site Connect mode (over wide area) and the other
logical channel can work in digital repeater mode (single site over local area).
B. Both logical channels can work in digital repeater mode (single site over local area).
C. Both logical channels can work in IP Site Connect mode (over wide area).
D. Only A and B are true (C is false).
E. Only A and C are true (B is false).
F. A, B, and C are true.
Answer: F

Motorola Solutions   certification MSC-241   MSC-241   MSC-241

Le test Certification Motorola Solutions MSC-241 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Motorola Solutions MSC-241. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Motorola Solutions MSC-241.

Pass4Test offre une formation sur Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 MSC-121 matériaux examen

Si vous traviallez dur encore pour préparer le test de Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 MSC-121 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 MSC-121.

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 MSC-121. Les documentations particulièrement visée au test Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 MSC-121 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 MSC-121.

Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 MSC-121 dans Pass4Test pour se former avant le test Motorola Solutions MSC-431 MSC-235 MSC-241 MSC-131 MSC-122 MSC-121.

Code d'Examen: MSC-431

Nom d'Examen: Motorola Solutions (Lean Six Sigma Black Belt)

Questions et réponses: 100 Q&As

Code d'Examen: MSC-235

Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Connect Plus Solutions BETA)

Questions et réponses: 130 Q&As

Code d'Examen: MSC-241

Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Solutions EMEA)

Questions et réponses: 108 Q&As

Code d'Examen: MSC-131

Nom d'Examen: Motorola Solutions (Design and Deploy AirDefense Solutions)

Questions et réponses: 103 Q&As

Code d'Examen: MSC-122

Nom d'Examen: Motorola Solutions (Deploy WLAN Solutions)

Questions et réponses: 113 Q&As

Code d'Examen: MSC-121

Nom d'Examen: Motorola Solutions (Design WLan Solutions)

Questions et réponses: 112 Q&As

MSC-241 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-241.html

NO.1 Which of the following antennas is BEST suited for providing coverage inside a tall building?
A. 4 element Yagi
B. Radiating coaxial cable
C. End-fed half-wave antenna
D. High gain collinear antenna
Answer: B

Motorola Solutions   certification MSC-241   certification MSC-241   MSC-241   certification MSC-241

NO.2 Which of the following are TRUE statements about operating a MOTOTRBO repeater in an IP
Site
Connect configuration?
A. One of its logical channels can work in IP Site Connect mode (over wide area) and the other
logical channel can work in digital repeater mode (single site over local area).
B. Both logical channels can work in digital repeater mode (single site over local area).
C. Both logical channels can work in IP Site Connect mode (over wide area).
D. Only A and B are true (C is false).
E. Only A and C are true (B is false).
F. A, B, and C are true.
Answer: F

Motorola Solutions   MSC-241 examen   MSC-241   MSC-241   MSC-241

NO.3 You are looking to optimize battery life of radios that are close to the base station. Which is
the
most likely parameter for optimizing the battery life of a radio for a Capacity Plus system?
A. Beacon interval
B. Beacon duration
C. High power mode in Radio
D. Low power mode in Radio
Answer: D

Motorola Solutions   MSC-241 examen   MSC-241

NO.4 A MOTOTRBO repeater is connected to a Zetron Model 35 Telephone Interconnect. If a
telephone
user dials the Telephone Interconnect number, they get a busy signal (engaged tone). If a radio
user dials any telephone number, they don’t hear the ringing tone, only silence. Upon visiting the
site, you find that when a radio user dials, the relay click can be heard from the Zetron Model 35.
Unplugging the RJ11 and dialing the Telephone Interconnect, still results in a busy signal
(engaged tone). With this information, what do you think could be wrong?
A. The Zetron Model 35 may be faulty.
B. The Zetron Model 35 has probably not been configured for the phone line Ringer Equivalence
Number (REN).
C. The RJ11 cable may have a short circuit or there is a short circuit somewhere between the site
and the exchange.
D. The repeater interface cable to the Zetron Model 35 is faulty.
Answer: C

Motorola Solutions examen   MSC-241   certification MSC-241   certification MSC-241

NO.5 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. The dealer needs to make a simple change in repeater
two (2) and utilize IP repeater programming (IRP) to access the repeater remotely. A couple of
days later the customer calls and complains about users getting system busy tones (engaged
tones).
The dealer attempts to connect an RDAC remotely to the system with no success. He has verified
he can communicate to the router at the site.
Which of the following statements BEST describes the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The master has gone down and the system is operating on just two (2) repeaters.
C. There is RF interference on the channel and the master repeater is unable to communicate to
the peers.
D. The peers are using DHCP and are not able to connect to the master and refresh their peer list.
The system is operating on just the master.
Answer: B

certification Motorola Solutions   MSC-241 examen   MSC-241

NO.6 Which of the following are TRUE statements about operating a MOTOTRBO repeater in a
Capacity Plus configuration?
A. One of its logical channels can work in trunked mode and the other logical channel can work in
data revert mode.
B. Both logical channels can work in trunked mode.
C. Both logical channels can work in data revert mode.
D. Only A & B are true (C is false)
E. Only B & C are true (A is false)
F. A, B, & C are true
Answer: F

Motorola Solutions examen   MSC-241   MSC-241   MSC-241

NO.7 On which type of channel in an IP Site Connect system are Transmit Interrupt features
supported
in repeater firmware releases R01.08.00 and higher?
A. Wide Area Slots only
B. Local Area Slots only
C. Both Wide and Local Area slots
D. Noneoftheabove
Answer: D

certification Motorola Solutions   MSC-241   MSC-241

NO.8 What will Enhanced Channel Access improve?
A. The amount of GPS updates that can be sent on a data revert channel
B. The amount of time from when PTT is pressed until voice is sent
C. Call success rate
D. Call setup time
Answer: C

certification Motorola Solutions   MSC-241 examen   MSC-241   MSC-241 examen   MSC-241

NO.9 What changes are required to the Master Repeater in an IP Site Connect system when a new
peer
is added to the system?
A. Both the IP address and port number of the new repeater must be configured into the Master
Repeater.
B. The address of the new peer must be configured into the Master Repeater.
C. The port of the new peer must be configured into the Master Repeater.
D. No changes are required to the Master Repeater.
Answer: D

Motorola Solutions examen   MSC-241   MSC-241   MSC-241

NO.10 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. On the 24th of May, there is a lighting strike at the site
and the building lost power, causing the three repeaters to revert to DC power. The design of the
site called for just the repeaters to be battery backed. However the next morning the customer
calls and reports that a number of talkgroups are getting busy tones (engaged), yet other groups
are seeing no busy tones (engaged) on the system. Which of the following statements BEST
describe the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The peers use DHCP and were not able to connect to the master and refresh their peer list and
went off the Capacity Plus network as their leases expired.
C. The switch was not on battery backup and there are no LAN connections on the Capacity Plus
system, each of the repeaters are now operating as three (3) independent Capacity Plus systems.
D. The peers use DHCP and were not able to connect to the master and refresh their peer list.
The dealer should have used static IP addresses throughout.
Answer: C

certification Motorola Solutions   certification MSC-241   MSC-241   certification MSC-241