Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification HP HP0-091. Il n'y a pas de soucis à réussir le test avec une haute note.
Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test HP HP0-091, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat HP HP0-091. Vous aurez une space plus grande à se développer.
Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.
L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification HP HP0-091. Les documentations particulièrement visée au test HP HP0-091 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test HP HP0-091.
Code d'Examen: HP0-091
Nom d'Examen: HP (HP-UX System Administration)
Questions et réponses: 149 Q&As
HP0-091 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-091.html
NO.1 What describes the difference between block and character I/O?
A.Block I/O is used to send data to disk and character I/O is not.
B.Character I/O is used to send data to disk and block I/O is not.
C.Block I/O goes through the buffer cache and character I/O does not.
D.Character I/O goes through the buffer cache and block I/O does not.
E.Block I/O is for large data transfers only and character I/O is for small data transferd only.
Correct:C
HP certification HP0-091 HP0-091 examen
NO.2 How do you set up a device swap area and ensure it is active at each system startup?
A.Start device swapping using the swapon command on an existing file system mount point.
B.Start device swapping using the swapon command on a logical volume; add an entry to the /etc/fstab
file.
C.Start device swapping using the swapon command on a logical volume; add an entry to the /etc/sbtab
file.
D.Start device swapping using the swapon command on a logical volume; add an entry to the /etc/vfstab
file.
Correct:B
HP certification HP0-091 HP0-091 examen
NO.3 In which directory does HP-UX supply default templates for the user startup files?
A./usr/home
B./etc/skel
C./home/template
D./etc/tmp
Correct:B
HP certification HP0-091 HP0-091 examen
NO.4 Place the steps to install a fibre channel card in the correct order.
Correct:
Green choice1---->Yellow Choice1
Green choice4---->Yellow Choice2
Green choice2---->Yellow Choice5
Green choice3---->Yellow Choice4
Green choice6---->Yellow Choice3
HP certification HP0-091 HP0-091 examen
NO.5 Which level is used by fbackup to complete a full backup?
A.0
B.1
C.9
D.F
E.V
Correct:A
HP certification HP0-091 HP0-091 examen
NO.6 What do physical volume links (pv links) provide?
A.access to a spare disk
B.automatic load balancing
C.an alternate path to a disk
D.improved RAID performance
Correct:C
HP certification HP0-091 HP0-091 examen
NO.7 During a run-state change from run level 1 to run level 2 , which script would be run last?
A./sbin/rc2.d/K900nfs.server
B./sbin/rc2.d/S500inetd
C./sbin/rc2.d/S430nfs.client
D./sbin/rc2.d/K200tps.rc
E./sbin/rc2.d/S620xfs
Correct:E
HP certification HP0-091 HP0-091 examen
NO.8 Which command shows all physical volumes in a volume group?
A.vgdisplay
B.pvdisplay
C.lvdisplay
D.lvmdisplay
Correct:A
HP certification HP0-091 HP0-091 examen
NO.9 If /tmp is 100% full, which commands are used to determine its volume location and if free space
is available on that disk?
A.bdf, vgdisplay
B.lvdisplay, diskinfo
C.bdf, lvdisplay, pvdisplay
D.vgdisplay, lvdisplay, diskinfo
Correct:C
HP certification HP0-091 HP0-091 examen
NO.10 Order the steps required to perform a complete integrity check of a journaled file system.
Correct:
Green choice1---->Yellow Choice4
Green choice3---->Yellow Choice1
Green choice5---->Yellow Choice2
Green choice4---->Yellow Choice5
Green choice7---->Yellow Choice3
HP certification HP0-091 HP0-091 examen
NO.11 What does the pvcreate command create?
A.a hard partition
B.a physical volume device file
C.the lvm disk resident structures
D.the physical links
Correct:C
HP certification HP0-091 HP0-091 examen
NO.12 What is the purpose of the lost+found directory?
A.allows fsck to recover orphaned files and directories
B.required on JFS file systems for journaling
C.functions as a trash can for the file system
D.a temporary storage for deleted files
Correct:A
HP certification HP0-091 HP0-091 examen
NO.13 How do you change a volume group name without unloading the data?
A.It is not possible.
B.vgchange
C.vgexport, mkdir, mknod, vgimport
D.vgremove, mkdir, mknod, vgcreate
Correct:C
HP certification HP0-091 HP0-091 examen
NO.14 Which command is used to recreate the /stand/system file?
A.system_prep
B.mkkernal
C.vi system
D.frecover
E.sysgen
Correct:A
HP certification HP0-091 HP0-091 examen
NO.15 You attempt to unmount a file system, /mydata, and get an error stating "device busy". How do
you determine the cause?
A.showmount -a
B.fuser -uc /mydata
C.showmount /mydata
D.mount -v /mydata
E.cat /etc/mnttab
Correct:B
HP certification HP0-091 HP0-091 examen
NO.16 What could possibly solve a paging problem?
A.add more NICs
B.add more CPUs
C.add more memory
D.add more internal disks
E.increase swap space
Correct:C
HP certification HP0-091 HP0-091 examen
NO.17 How does root allow an ordinary user to add/remove printers in SAM?
A.not possible
B.edit sam.allow
C.set the UID bit
D.establish a restricted build
Correct:D
HP certification HP0-091 HP0-091 examen
NO.18 Which commands can be used to create device files? Select TWO.
A.mkdevice
B.insf
C.fsadm
D.mksf
E.devstart
Correct:B D
HP certification HP0-091 HP0-091 examen
NO.19 Which file does an HP-UX administrator edit to turn the bootp daemon on at boot?
A./etc/bootp
B./etc/inetd.conf
C./etc/rc.config.d/netconf
D./etc/rc.config.d/netdaemon
Correct:B
HP certification HP0-091 HP0-091 examen
NO.20 Which statement is true regarding a device file's major number?
A.It is determined by its hardware address.
B.It points to the associated kernel driver.
C.It is used to allocate buffer space.
D.It determines the device's interrupt priority.
E.It sets the kernel response timeout in tics.
Correct:B
HP certification HP0-091 HP0-091 examen
Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
没有评论:
发表评论