C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
Est-que vous s'inquiétez encore à passer le test Certification 070-412 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Microsoft 070-412? Si vous voulez réussir le test Microsoft 070-412 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Microsoft 070-412 à se preuver. Mais le taux du succès et bien bas. Participer le test Microsoft 070-412 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Code d'Examen: 072-642
Nom d'Examen: Microsoft (TS: Windows Server 2008 Network Infrastructure, Configuring Certification)
Questions et réponses: 200 Q&As
Code d'Examen: 070-412
Nom d'Examen: Microsoft (Configuring Advanced Windows Server 2012 Services)
Questions et réponses: 186 Q&As
Choisir le Pass4Test peut vous aider à réussir 100% le test Microsoft 070-412 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Microsoft 070-412 peut vous assurer à réussir 100% le test Microsoft 070-412. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Le test Microsoft 070-412 est bien populaire dans l'Industrie IT. Donc il y a de plus en plus de gens à participer le test Microsoft 070-412. En fait, c'est pas facile à passer le test si on n'a pas une formation particulière. Pass4Test peut vous aider à économiser le temps et les efforts à réussir le test Certification.
Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Microsoft 072-642, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.
070-412 Démo gratuit à télécharger: http://www.pass4test.fr/070-412.html
NO.1 Your network contains an Active Directory domain named contoso.com. A previous
administrator
implemented a Proof of Concept installation of Active Directory Rights Management Services (AD
RMS).
After the proof of concept was complete, the Active Directory Rights Management Services server
role
was removed. You attempt to deploy AD RMS. During the configuration of AD RMS, you receive an
error
message indicating that an existing AD RMS Service Connection Point (SCP) was found. You need to
remove the existing AD RMS SCP . Which tool should you use?
A. ADSI Edit
B. Active Directory Users and Computers
C. Active Directory Domains and Trusts
D. Active Directory Sites and Services
E. Services
F. Authorization Manager
G. TPM Management
H. Certification Authority
Answer: AD
certification Microsoft 070-412 070-412 070-412 examen 070-412 070-412 examen
NO.2 Note: This question is part of a series of questions that use the same or similar answer choices.
An
answer choice may be correct for more than one question in the series. Each question is
independent of
the other questions in this series. Information and details provided in a question apply only to that
question. Your network contains an Active Directory domain named contoso.com. The domain
contains
two member servers named Server1 and Server2. All servers run Windows Server 2012. Server1
and
Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a
failover
cluster named Cluster1. You add two additional nodes in Cluster1. You have a folder named Folder1
on
Server1 that hosts application data. Folder1 is a folder target in a Distributed File System (DFS)
namespace. You need to provide highly available access to Folder1. The solution must support DFS
Replication to Folder1. What should you configure?
A. the cluster quorum settings
B. Affinity
Single
C. live migration
D. the preferred owner
E. quick migration
F. the Scale-Out File Server
G. Affinity
None
H. the possible owner
I. the Handling priority
J. the host priority
K. a file server for general use
L. the failover settings
Answer: K
Microsoft certification 070-412 070-412
NO.3 You have a datacenter that contains six servers. Each server has the Hyper-V server role
installed and
runs Windows Server 2012. The servers are configured as shown in the following table.
Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1.
You
need to move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1. To
which
server and by which method should you move VM1?
A. to Host6 by using a storage migration
B. to Host2 by using a live migration
C. to Host3 by using a storage migration
D. to Host1 by using a quick migration
Answer: C
Microsoft examen 070-412 070-412 certification 070-412 certification 070-412
NO.4 Your network contains an Active Directory domain named contoso.com. The domain contains
two
servers named Server1 and Server2 that run Windows Server 2012. Server1 has the DHCP Server
server role installed. Server2 has the Hyper-V server role installed. Server2 has an IP address of
192.168.10.50. Server1 has a scope named Scope1 for the 192.168.10.0/24 network. You plan to
deploy
20 virtual machines on Server2 that will be connected to the external network. The MAC addresses
for the
virtual machines will begin with 00-15-5D-83-03. You need to configure Server1 to offer the virtual
machines IP addresses from 192.168.10.200 to 192.168.10.219. Physical computers on the network
must
be offered IP addresses outside this range. You want to achieve this goal by using the minimum
amount
of administrative effort. What should you do from the DHCP console?
A. Delete Scope1 and create two new scopes.
B. Configure Allow filters and Deny filters.
C. Create a policy.
D. Create reservations.
Answer: C
Microsoft certification 070-412 certification 070-412 070-412 070-412 examen
NO.5 Note: This question is part of a series of questions that use the same or similar answer choices.
An
answer choice may be correct for more than one question in the series. Each question is
independent of
the other questions in this series. Information and details provided in a question apply only to that
question. Your network contains an Active Directory domain named contoso.com. The domain
contains
two member servers named Server1 and Server2. All servers run Windows Server 2012. Server1
and
Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a
failover
cluster named Cluster1. You add two additional nodes to Cluster1. You need to ensure that Cluster1
stops
running if three nodes fail. What should you configure?
A. the possible owner
B. a file server for general use
C. live migration
D. the Handling priority
E. the preferred owner
F. the cluster quorum settings
G. the host priority
H. the Scale-Out File Server
I. the failover settings
J. Affinity
Single
K. Affinity
None
L. quick migration
Answer: F
Microsoft examen certification 070-412 070-412 examen
没有评论:
发表评论